The addition of special additives gives the material extremely good tribological properties (low wear and low coefficient of friction) in many sliding applications. Sustatron PPS MOD is therefore particularly suitable as a high-quality solution for bearings, bushings, valves, and compressor applications, especially at high temperatures. The fiber reinforcement also guarantees good performance even above the glass transition temperature.
| 製品コード | 製品名 | 形状 | 形状 | 色 | 製品サイズ | 長さ | 幅 | 厚み | 高さ | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 在庫なし(MOQあり) | 809727 | Sustatron® PPS MOD blue extruded | 丸棒 | 丸棒 | blue | Ø 60 x 3000 mm | 3,000 mm | 60 mm | |||
| 在庫なし(MOQあり) | 809728 | Sustatron® PPS MOD blue extruded | 丸棒 | 丸棒 | blue | Ø 60 x 1000 mm | 1,000 mm | 60 mm | |||
| 在庫なし(MOQあり) | 809730 | Sustatron® PPS MOD blue extruded | 丸棒 | 丸棒 | blue | Ø 40 x 1000 mm | 1,000 mm | 40 mm | |||
| 在庫なし(MOQあり) | 809732 | Sustatron® PPS MOD blue extruded | 丸棒 | 丸棒 | blue | Ø 16 x 3000 mm | 3,000 mm | 16 mm | |||
| 在庫なし(MOQあり) | 810101 | Sustatron® PPS MOD blue extruded | 丸棒 | 丸棒 | blue | Ø 100 x 3000 mm | 3,000 mm | 100 mm | |||
| 在庫なし(MOQあり) | 921205 | Sustatron® PPS MOD blue extruded | 丸棒 | 丸棒 | blue | Ø 90 x 3000 mm | 3,000 mm | 90 mm |
| 試験法 | 単位 | 数値 | |
|---|---|---|---|
| 密度 | DIN EN ISO 1183-1 | g / cm3 | 1,38 |
| 吸水率 | DIN EN ISO 62 | % | 0,0 |
| 燃焼性 (厚み 3 mm / 6 mm) | UL 94 | V0 / V0 |
| 試験法 | 単位 | 数値 | |
|---|---|---|---|
| 引張降伏応力 | DIN EN ISO 527 | MPa | 50 |
| 引張破壊呼び歪 | DIN EN ISO 527 | % | 4 |
| 引張弾性率 | DIN EN ISO 527 | MPa | 3000 |
| ノッチ付き衝撃耐性 | DIN EN ISO 179 | kJ / m2 | 5,0 |
| ショア硬度 | DIN EN ISO 868 | scale D | 77 |
| 試験法 | 単位 | 数値 | |
|---|---|---|---|
| 融点 | ISO 11357-3 | °C | 285 |
| 線膨張係数 | DIN 53752 | 10-6 / K | 50 |
| 使用温度(長期) | 平均値 | °C | -20 … 220 |
| 使用温度(短期、最大) | 平均値 | °C | 260 |
| 試験法 | 単位 | 数値 | |
|---|---|---|---|
| 体積固有抵抗 | DIN EN 62631-3-1 | Ω * cm | 1016 |
| 表面固有抵抗 | DIN EN 62631-3-2 | Ω | 1013 |