SustaPEEK® CM LD is a specially developed lightweight plastic, where LD stands for Low Density. It is manufactured using the hot pressing process, which guarantees very low residual stresses and warpage.
You can use this lightweight solution whenever you want to optimize the efficiency of your process.
By reducing the weight of your component, you can either increase load-bearing capacities, increase process speeds or reduce energy costs.
製品コード | 製品名 | 形状 | 形状 | 色 | 製品サイズ | 長さ | 幅 | 厚み | 高さ | ||
---|---|---|---|---|---|---|---|---|---|---|---|
在庫なし(MOQあり) | 883545 | SustaPEEK CM LD natural pressed | 板 | 板 | natural | 16 x 395 x 395 mm | 395 mm | 395 mm | 16 mm |
試験法 | 単位 | 数値 | |
---|---|---|---|
密度 | DIN EN ISO 1183-1 | g / cm3 | 0,95 |
試験法 | 単位 | 数値 | |
---|---|---|---|
引張破壊呼び歪 | DIN EN ISO 527 | % | 2 |
引張弾性率 | DIN EN ISO 527 | MPa | 4700 |
引張強度 | DIN EN ISO 527 | MPa | 65 |
ノッチ付き衝撃耐性 | DIN EN ISO 179 | kJ / m2 | 2 |
ショア硬度 | DIN EN ISO 868 | scale D | 85 |
ボールインデンテーション硬度 | DIN EN ISO 2039-1 | MPa | 250 |
圧縮強度 | DIN EN ISO 604 | MPa | 4000 |
試験法 | 単位 | 数値 | |
---|---|---|---|
融点 | ISO 11357-3 | °C | 337 |
使用温度(長期) | 平均値 | °C | -60...250 |
使用温度(短期、最大) | 平均値 | °C | 310 |