Polystone® P copolymer EHS grau - ASTM
PP
Besondere Eigenschaften
- Hohe Festigkeit
- Sehr gute Verschweißbarkeit
- Korrosionsbeständigkeit
Technische Daten Polystone® P copolymer EHS grey - ASTM
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Dichte | ASTM D792 | g / cm3 | 0.91 |
| Water Absorption | ASTM D570 | % | <0.10 |
| Carbon Black Content | ISO6964 | % | n/a |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Tensile Strength at Yield | ASTM D638 | psi | 3500 |
| Hardness | ASTM D2240 | Shore D | 69 |
| Tensile Elongation | ASTM D638 | % | >300 |
| Flexural Modulus | ASTM D790 | psi | 155000 |
| Compressive Strength | ASTM D695 | psi | 4000 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 8 |
| Coefficient of Friction, Dynamic | 0.25-0.28 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 6 |
| Melting Point | °F | 323 | |
| Maximum Service Temperature, Air | °F | 230 | |
| Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 210 |
| Deflection Temperature at 1.8Mpa (66psi) | ASTM D648 | °F | 217 |
| Flammability, UL94 | 1/8 inch | HB |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Dielektrizitätszahl | ASTM D150 | 1MHz | 2.5 |
| Durchschlagfestigkeit | ASTM D149 | 45 | |
| Oberflächenwiderstand | ASTM D257 | Ohm/cm | >1014 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| FDA | Yes | ||
| NSF | No | ||
| USDA | Yes | ||
| ASTM Approval | D-4101 |
