Sustamid® 6G OL - ASTM
PA — PA 6 G
Besondere Eigenschaften
- Selbstschmierend
- Verbesserung der "stick-slip" Eigenschaften
- hohe Feuchtigkeitsaufnahme von bis zu 3 % im Normalklima
- Gute Gleiteigenschaften
Technische Daten Sustamid® 6G OL - ASTM
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Dichte | ASTM D792 | g / cm3 | 1.15 |
| Water Absorption | ASTM D570 | % | 5.0 |
| Water Absorption 24 hours | ASTM D570 | % | 1.0 |
| Dissipation Factor | ASTM D150 | 1MHz | - |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Härte | ASTM D2240 | Shore D | 74 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 11000 |
| Tensile Modulus | ASTM D638 | psi | 370000 |
| Reißdehnung | ASTM D638 | % | 30 |
| Flexural Strength | ASTM D790 | psi | 14000 |
| Flexural Modulus | ASTM D790 | psi | 380000 |
| Compressive Strength | ASTM D695 | psi | 13500 |
| Rockwell Hardness | ASTM D785 | 85 | |
| Rockwell Hardness | ASTM D785 | R | 115 |
| Shear Strength | ASTM D732 | psi | 8000 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 1.2 |
| Coefficient of Friction, Dynamic | 0.12 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Wärmeleitfähigkeit | in/hr/ft2 /°F | 1.7 | |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 5.0 |
| Melting Point | °F | 430 | |
| Continuous Service Temperature, Air | °F | 210 | |
| Flammability, UL94 | 1/8 inch | HB | |
| Deflection Temperature at 264psi | ASTM D648 | °F | 200 |
| Deflection Temperature at 66psi | ASTM D648 | °F | 380 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Dielektrizitätszahl | ASTM D150 | 1MHz | 3.7 |
| Durchschlagfestigkeit | ASTM D149 | V/mil | 500 |
| Oberflächenwiderstand | ASTM D257 | Ω/cm | >1013 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| FDA | No | ||
| NSF | No | ||
| USDA | No |
