Select a different country or region to see specific content for your location.

Please select a language / region


Plastics for working & recreational boats

Especially for the construction of working boats and recreational boats we offer a wide range of thermoplastics. Depending on the material they resist corrosive salt water, are UV and weather-resistant, of high quality visually and are easy to process. They support you with the construction of, for example, long-lived fishing boats, robust rescue boats, safe ferries and optically high-quality yachts.

Your advantages

Typical areas of application

Product examples

Hull and decks for recreational boats

Hulls and decks for recreational boats made of ABS in vacuum forming are characterized by a high impact strength also under cold and a high weather-resistance. Therefore they are long-lasting and can be used in areas with low temperatures permanently.

Details - ABS

Working boats made of Polystone® G

Working boats constructed of Polystone® G HD black (PE-HD), such as fishing, police and rescue boats, are particularly long-lived and resilient. At a density of 0.96 g/cm³, the material is about eight times lighter than steel. The low weight supports manoeuvrability and fuel efficiency. At the same time, the material is resilient against salt water, oil and fuels and does not corrode. A protective coat of paint is not necessary. Outstanding UV resilience permits permanent use outdoors.

Details - Polystone® G HD black

Anti-slip decks with Polystone® Safe-Tec

Decks made of Polystone® Safe-Tec combine safety and design. The special, non-slip surface offers a very high slip-resistance even when wet. With its high resistance to UV and weathering, Polystone® Safe-Tec is suitable for permanent outdoor use. In addition, it can be welded with boat hulls made of HD-PE. Decks made of Polystone® Safe-Tec therefore contribute to a long-term high-quality visual appearance of your boats.

Details - Polystone® Safe-Tec

Letterings and graphic elements made of Play-Tec®

With letterings and graphic elements made of Play-Tec® you can design your boats individually. Names, symbols or safety instructions can be easily machined individually into the surface. Play-Tec® is available in all RAL colours one-, two- or three-coloured. Therefore Play-Tec® offers plenty of room for creative ideas. Specially developed for outdoor use, Play-Tec® is water and dirt repellent and withstands the high demands of UV radiation and weather conditions as well as corrosive salt water at sea. The surface is easy to clean and offers a visually high-quality appearance.

Details - Play-Tec® 

Ship equipment made of Polystone® Marine-Tec

Polystone® Marine-Tec is a material specifically developed for ship equipment. It connects particularly high salt-water resilience with simple machining capacity and is characterised by a visually high-quality and easy-care surface. Thus, it permits easy production of equipment elements such as separations, control stands, platforms and storage spaces.

Details - Polystone® Marine-Tec

Covers for ship engines made of Sustavacu® 6 GF (PA 6)

Ship engine manufacturers use our deep-drawable material Sustavacu® 6 GF (PA 6) with glass fiber reinforcement due to its good dimensional stability and high continuous operating temperature (140 ° C) as covers for ship engines.  More information about Sustavacu® 6 GF


Arrange technical advice

The performance and reliability of materials for ships and boats are influenced by a variety of factors. These criteria need to be considered in order to make the right choice. Examples:

We are happy to advise you on the selection of suitable materials for your particular application. Just use our contact form at the bottom of the page and write to us.


Refine Results



Print to PDF

Newsletter Registration

Select Website

Plastics for technical Applications