Sustason® PPSU MG brown

PPSU

rodsheet

Characteristics

Sterilization resistant
High heat deflection temperature
ISO 10993 tested on semi-finished product
Highly impact resistant
Chemical resistance

Industries

Healthcare

Application Examples

Plastic components for endoscopes

Challenge: Lower weight than previous metal construction so surgeions can operate longer and more delicately. Sustason^® PPSU MG was chosen in order to reduce weight Sterilisation resistance over 1,000 cycles + surface finishing upon customer request Better feeling as plastic is warmer than metal Machined in tight tolerances Different colors available

Sizing trials

For example for knee implants, hip socket implants and sockets Very high accuracy Very high surface quality Machined to high tolerances according to customer drawings Material Sustason^® PPSU MG Sustarin^® C HG

Materials for ventilators

Highest medical requirements in terms of fuctionality, reliability and process stability. Support in the process with our wide range of thermoplastics.

Variants

Show product in Webshop

	SKU	Name	Type	Measurements	Length	Width	Thickness
Not in stock (MOQ)	600847	Sustason® PPSU MG brown extruded	rod	Ø 50 x 3000 mm	3,000 mm		50 mm
Not in stock (MOQ)	601600	Sustason® PPSU MG brown extruded	rod	Ø 60 x 1000 mm	1,000 mm		60 mm
Not in stock (MOQ)	632430	Sustason® PPSU MG brown extruded	sheet	30 x 620 x 2000 mm	2,000 mm	620 mm	30 mm
Not in stock (MOQ)	632431	Sustason® PPSU MG brown extruded	sheet	50 x 620 x 2000 mm	2,000 mm	620 mm	50 mm
Not in stock (MOQ)	632434	Sustason® PPSU MG brown extruded	rod	Ø 35 x 1000 mm	1,000 mm		35 mm
Not in stock (MOQ)	632435	Sustason® PPSU MG brown extruded	rod	Ø 35 x 3000 mm	3,000 mm		35 mm
Not in stock (MOQ)	632437	Sustason® PPSU MG brown extruded	rod	Ø 32 x 1000 mm	1,000 mm		32 mm
Not in stock (MOQ)	632438	Sustason® PPSU MG brown extruded	rod	Ø 32 x 3000 mm	3,000 mm		32 mm
Not in stock (MOQ)	632440	Sustason® PPSU MG brown extruded	rod	Ø 75 x 1000 mm	1,000 mm		75 mm
Not in stock (MOQ)	632441	Sustason® PPSU MG brown extruded	rod	Ø 75 x 3000 mm	3,000 mm		75 mm
Not in stock (MOQ)	634035	Sustason® PPSU MG brown extruded	rod	Ø 50 x 1000 mm	1,000 mm		50 mm
Not in stock (MOQ)	650213	Sustason® PPSU MG brown extruded	rod	Ø 45 x 1000 mm	1,000 mm		45 mm
Not in stock (MOQ)	650217	Sustason® PPSU MG brown extruded	rod	Ø 45 x 3000 mm	3,000 mm		45 mm
Not in stock (MOQ)	666985	Sustason® PPSU MG brown extruded	rod	Ø 25 x 3000 mm	3,000 mm		25 mm
Not in stock (MOQ)	666987	Sustason® PPSU MG brown extruded	rod	Ø 25 x 1000 mm	1,000 mm		25 mm
Not in stock (MOQ)	672556	Sustason® PPSU MG brown extruded	rod	Ø 70 x 3000 mm	3,000 mm		70 mm
Not in stock (MOQ)	931691	Sustason® PPSU MG brown extruded	rod	Ø 70 x 1000 mm	1,000 mm		70 mm
Not in stock (MOQ)	931697	Sustason® PPSU MG brown extruded	rod	Ø 100 x 1000 mm	1,000 mm		100 mm
Not in stock (MOQ)	931698	Sustason® PPSU MG brown extruded	rod	Ø 100 x 3000 mm	3,000 mm		100 mm
Not in stock (MOQ)	931955	Sustason® PPSU MG brown extruded	rod	Ø 80 x 1000 mm	1,000 mm		80 mm
Not in stock (MOQ)	931956	Sustason® PPSU MG brown extruded	rod	Ø 80 x 3000 mm	3,000 mm		80 mm
Not in stock (MOQ)	933150	Sustason® PPSU MG brown extruded	rod	Ø 40 x 3000 mm	3,000 mm		40 mm
Not in stock (MOQ)	933852	Sustason® PPSU MG brown extruded	rod	Ø 40 x 1000 mm	1,000 mm		40 mm
Not in stock (MOQ)	934893	Sustason® PPSU MG brown extruded	rod	Ø 60 x 3000 mm	3,000 mm		60 mm
Not in stock (MOQ)	934941	Sustason® PPSU MG brown extruded	rod	Ø 55 x 3000 mm	3,000 mm		55 mm
Not in stock (MOQ)	934942	Sustason® PPSU MG brown extruded	rod	Ø 55 x 1000 mm	1,000 mm		55 mm

Technical Specifications Sustason® PPSU MG brown

General properties

	Test Method	Unit	Guideline Value
Density	DIN EN ISO 1183-1	g / cm³	1,29
Water absorption	DIN EN ISO 62	%	0,6
Flammability (Thickness 3 mm / 6 mm)	UL 94		V0 / V0

Mechanical properties

	Test Method	Unit	Guideline Value
Yield stress	DIN EN ISO 527	MPa	77
Elongation at break	DIN EN ISO 527	%	30
Tensile modulus of elasticity	DIN EN ISO 527	MPa	2500
Notched impact strength	DIN EN ISO 179	kJ / m²	10

Thermal properties

	Test Method	Unit	Guideline Value
Melting temperature	ISO 11357-3	°C	-
Glass transition temperature	ISO 11357-3	°C	220
Thermal conductivity	DIN 52612-1	W / (m * K)	0,35
Coefficient of linear thermal expansion	DIN 53752	10^-6 / K	55
Service temperature, long term	Average	°C	-50 … 180
Service temperature, short term (max.)	Average	°C	210
Heat deflection temperature	DIN EN ISO 75, Verf. A, HDT	°C	205

Electrical properties

	Test Method	Unit	Guideline Value
Dielectric constant	IEC 60250		3,44
Volume resistivity	DIN EN 62631-3-1	Ohm * cm	10¹⁵
Dielectric strength	IEC 60243	kV / mm	15

Sustason® PPSU MG brown

PPSU

Characteristics

Industries

Application Examples

Plastic components for endoscopes

Sizing trials

Materials for ventilators

Variants

Technical Specifications Sustason® PPSU MG brown

General properties

Mechanical properties

Thermal properties

Electrical properties

Downloads

Technical Data Sheet

Product Handling (including processing instructions, storage instructions and general safety instructions)

Additional Documents

Contact

Refine Results

Share this page:

Select Website

Röchling

Automotive

Industrial

Medical

Career