LubX® CV+ modrý
PE — PE-UHMW - PE 1000
LubX® CV is a sliding material especially for systems and machinery used in conveyor technology and automation. The material was developed for systems intended to be operated at higher velocities and pressure loads, meaning increased productivity. Scientific research shows: The material significantly improves system performance and efficiency. Even when used for high-load applications, it retains its excellent sliding characteristics and high wear resistance.
LubX® CV has:
- exceptionally good sliding properties
- at the same time exhibits a very low temperature development
- Both results in lower wear and a longer lifespan of the entire system.
water blue, similar RAL 5021
sheet
Characteristics
- Good sliding properties even at higher load
- Good machinability
- GMP 2023/2006 EC compliant
Industries
Potravinářský průmysl
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 508771 | LubX® CV+ blue extruded | Special profile | Special profile (R337) | water blue, similar RAL 5021 | 50.000 x 24 x 18 mm | 50 000 mm | 24 mm | 18 mm | ||
| No stock item (MOQ) | 508882 | LubX® CV+ blue extruded | Special profile | Special profile (R540) | water blue, similar RAL 5021 | 50.000 x 25 x 16 mm | 50 000 mm | 25 mm | 16 mm | ||
| No stock item (MOQ) | 505585 | LubX® CV+ blue pressed | sheet | sheet | water blue, similar RAL 5021 | 10 x 1000 x 2000 mm | 2 000 mm | 1 000 mm | 10 mm |
Technical Specifications LubX® CV+ blue
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hustota | DIN EN ISO 1183-1 | g / cm3 | 0,94 |
| Absorpce vody | DIN EN ISO 62 | % | 0,01 |
| Hořlavost (tloušťka 3 mm / 6 mm) | UL 94 | HB | |
| Netoxicita | + |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Mez kluzu | DIN EN ISO 527 | MPa | 19 |
| Prodloužení při přetržení | DIN EN ISO 527 | % | >250 |
| Modul pružnosti v tahu | DIN EN ISO 527 | MPa | 500 |
| Vrubová houževnatost | DIN EN ISO 179 | kJ / m2 | No break |
| Tvrdost Shore | DIN EN ISO 868 | scale D | 60 |
| Kluzný partner POM MOD A (0,75 m/s - 0,25 MPa) | REP - Tribologický test | 0,12 | |
| Kluzný partner POM MOD B (0,75 m/s - 0,25 MPa) | REP - Tribologický test | 0,13 | |
| Kluzný partner PA MOD (0,75 m/s - 0,25 MPa) | REP - Tribologický test | 0,11 | |
| Kluzný partner Vysoce kvalitní ocel (0,75 m/s - 0,25 MPa) | REP - Tribologický test | 0,17 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Teplota tání | ISO 11357-3 | °C | 133 ... 135 |
| Koeficient lineární teplotní roztažnosti | DIN 53752 | 10-6 / K | 150 ... 230 (*) |
| Provozní teplota dlouhodobá | Průměr | °C | -150 ... 80 (*) |
| Provozní teplota krátkodobá (max.) | Průměr | °C | 130 (*) |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Objemový odpor | DIN EN 62631-3-1 | Ω * cm | >1015 |
| Povrchový odpor | DIN EN 62631-3-2 | Ω | >1014 |
