Sustatron® PPS MOD modrý
PPS
The High Performance Sliding Material
The addition of special additives gives the material extremely good tribological properties (low wear and low coefficient of friction) in many sliding applications. Sustatron PPS MOD is therefore particularly suitable as a high-quality solution for bearings, bushings, valves, and compressor applications, especially at high temperatures. The fiber reinforcement also guarantees good performance even above the glass transition temperature.
blue
rod
Characteristics
- High hardness
- High rigidity
- High heat deflection temperature
- Low moisture absorption
- Chemical resistant
- Low wear
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 809727 | Sustatron® PPS MOD blue extruded | rod | rod | blue | Ø 60 x 3000 mm | 3 000 mm | 60 mm | |||
| No stock item (MOQ) | 809728 | Sustatron® PPS MOD blue extruded | rod | rod | blue | Ø 60 x 1000 mm | 1 000 mm | 60 mm | |||
| No stock item (MOQ) | 809730 | Sustatron® PPS MOD blue extruded | rod | rod | blue | Ø 40 x 1000 mm | 1 000 mm | 40 mm | |||
| No stock item (MOQ) | 809732 | Sustatron® PPS MOD blue extruded | rod | rod | blue | Ø 16 x 3000 mm | 3 000 mm | 16 mm | |||
| No stock item (MOQ) | 810101 | Sustatron® PPS MOD blue extruded | rod | rod | blue | Ø 100 x 3000 mm | 3 000 mm | 100 mm | |||
| No stock item (MOQ) | 921205 | Sustatron® PPS MOD blue extruded | rod | rod | blue | Ø 90 x 3000 mm | 3 000 mm | 90 mm |
Technical Specifications Sustatron® PPS MOD blue
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hustota | DIN EN ISO 1183-1 | g / cm3 | 1,38 |
| Absorpce vody | DIN EN ISO 62 | % | 0,0 |
| Hořlavost (tloušťka 3 mm / 6 mm) | UL 94 | V0 / V0 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Mez kluzu | DIN EN ISO 527 | MPa | 50 |
| Prodloužení při přetržení | DIN EN ISO 527 | % | 4 |
| Modul pružnosti v tahu | DIN EN ISO 527 | MPa | 3000 |
| Vrubová houževnatost | DIN EN ISO 179 | kJ / m2 | 5,0 |
| Tvrdost Shore | DIN EN ISO 868 | scale D | 77 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Teplota tání | ISO 11357-3 | °C | 285 |
| Koeficient lineární teplotní roztažnosti | DIN 53752 | 10-6 / K | 50 |
| Provozní teplota dlouhodobá | Průměr | °C | -20 … 220 |
| Provozní teplota krátkodobá (max.) | Průměr | °C | 260 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Objemový odpor | DIN EN 62631-3-1 | Ω * cm | 1016 |
| Povrchový odpor | DIN EN 62631-3-2 | Ω | 1013 |
