Sustatron® PPS GF 40 přírodní
PPS
The reinforced High Performance Thermoplast
The addition of 40 percent glass fiber by weight increases the mechanical strength and stiffness compared to unfilled PPS across the entire application temperature range. At the same time, the coefficient of thermal expansion is lower. Sustatron PPS GF40 is therefore particularly suitable for mechanically highly stressed, very dimensionally stable components, especially at temperatures above the glass transition temperature (90°C).
natural
rod
Characteristics
- Low creep tendency
- Flame retardant
- Self-extinguishing
- High continuous service temperature
- High stiffness
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 715441 | Sustatron® PPS GF 40 natural extruded | rod | rod | natural | Ø 20 x 3000 mm | 3 000 mm | 20 mm | |||
| No stock item (MOQ) | 715445 | Sustatron® PPS GF 40 natural extruded | rod | rod | natural | Ø 40 x 3000 mm | 3 000 mm | 40 mm | |||
| No stock item (MOQ) | 715447 | Sustatron® PPS GF 40 natural extruded | rod | rod | natural | Ø 50 x 3000 mm | 3 000 mm | 50 mm | |||
| No stock item (MOQ) | 715448 | Sustatron® PPS GF 40 natural extruded | rod | rod | natural | Ø 60 x 3000 mm | 3 000 mm | 60 mm | |||
| No stock item (MOQ) | 808633 | Sustatron® PPS GF 40 natural extruded | rod | rod | natural | Ø 30 x 3000 mm | 3 000 mm | 30 mm | |||
| No stock item (MOQ) | 808634 | Sustatron® PPS GF 40 natural extruded | rod | rod | natural | Ø 30 x 1000 mm | 1 000 mm | 30 mm |
Technical Specifications Sustatron® PPS GF 40 natural
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hustota | DIN EN ISO 1183-1 | g / cm3 | 1,65 |
| Absorpce vody | DIN EN ISO 62 | % | 0,0 |
| Hořlavost (tloušťka 3 mm / 6 mm) | UL 94 | V0 / V0 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Mez kluzu | DIN EN ISO 527 | MPa | 90 |
| Prodloužení při přetržení | DIN EN ISO 527 | % | 2 |
| Modul pružnosti v tahu | DIN EN ISO 527 | MPa | 6500 |
| Tvrdost Shore | DIN EN ISO 868 | scale D | 92 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Teplota tání | ISO 11357-3 | °C | 285 |
| Koeficient lineární teplotní roztažnosti | DIN 53752 | 10-6 / K | 30 |
| Provozní teplota dlouhodobá | Průměr | °C | 0 … 220 |
| Provozní teplota krátkodobá (max.) | Průměr | °C | 250 |
| Teplota tepelné deformace | DIN EN ISO 75, Verf. A, HDT | °C | 260 |
