SustaPEI MG natural
PEI
Our specialist for medical devices
SustaPEI MG was developed for the high demands of the healthcare sector. As a material with high purity and very good resistance to sterilisation, it is ideal for surgical instruments, for example. Thanks to its high glass transition temperature, PEI retains its mechanical properties and dimensional stability up to approx. 170° C. The strength level is above that of other amorphous high-performance plastics (PSU, PPSU). PEI has a remarkably high resistance to high-energy gamma radiation.
natural
rod
Characteristics
- High purity
- Good sterilisation resistance
- High stiffness even at high temperatures
- High continuous service temperature
- ISO 10993-5 tested on semi-finished product
- Good resistance against high energy radiation
Industries
We are a system supplier and partner from the idea to the OEM's end product - as a cooperative value contribution. We are able to support the healthcare industry at the highest level.
Armin Reuner - Industry Manager Healthcare - Mail: AReuner@roechling.com
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 793018 | SustaPEI MG natural extruded | rod | rod | natural | Ø 50 x 3000 mm | 3 000 mm | 50 mm | |||
| No stock item (MOQ) | 888431 | SustaPEI MG natural extruded | rod | rod | natural | Ø 45 x 3000 mm | 3 000 mm | 45 mm | |||
| No stock item (MOQ) | 888432 | SustaPEI MG natural extruded | rod | rod | natural | Ø 40 x 3000 mm | 3 000 mm | 40 mm |
Technical Specifications SustaPEI MG natural
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hustota | DIN EN ISO 1183-1 | g / cm3 | 1,28 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Mez kluzu | DIN EN ISO 527 | MPa | 125 |
| Prodloužení při přetržení | DIN EN ISO 527 | % | 10 |
| Modul pružnosti v tahu | DIN EN ISO 527 | MPa | 3200 |
| Pevnost v tahu | DIN EN ISO 527 | MPa | 125 |
| Tvrdost Shore | DIN EN ISO 868 | scale D | 87 |
| Tvrdost kuličkového vtisku (H358/30) | DIN EN ISO 2039-1 | MPa | 230 |
| Houževnatost bez vrubu (dle Charpyho) | DIN EN ISO 179/1eU | kJ / m2 | 3,2 |
| Tvrdost Shore | DIN EN ISO 868 | Shore D | 87 |
| Modul pružnosti v tlaku | DIN EN ISO 604 | MPa | 3150 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Teplota přechodu do skelného stavu | ISO 11357-3 | °C | 216 |
