SustaPEI GF 30 přírodní
PEI
The Reinforced Amorphous High Performance Polymer
The addition of 30 % glass fibre by weight increases the mechanical strength and rigidity compared to unfilled PEI across the entire application temperature range to an even higher level. At the same time, the thermal expansion coefficient is lower. SustaPEI GF30 is therefore particularly suitable for components that are subject to high mechanical loads and require high dimensional stability. Application temperatures of up to ap 170°C continuously and 190°C for short periods are possible.
natural
rod
Characteristics
- High heat deflection temperature
- Flame retardant
- Low smoke development
- High stiffness
- High tensile strength
- High hardness
- high dimensional stability under heat
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 696851 | SustaPEI GF 30 natural extruded | rod | rod | natural | Ø 80 x 3000 mm | 3 000 mm | 80 mm | |||
| No stock item (MOQ) | 697173 | SustaPEI GF 30 natural extruded | rod | rod | natural | Ø 80 x 1000 mm | 1 000 mm | 80 mm | |||
| No stock item (MOQ) | 700289 | SustaPEI GF 30 natural extruded | rod | rod | natural | Ø 110 x 1000 mm | 1 000 mm | 110 mm |
Technical Specifications SustaPEI GF 30 natural
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hustota | DIN EN ISO 1183-1 | g / cm3 | 1,51 |
| Absorpce vody | DIN EN ISO 62 | % | 0,4 |
| Hořlavost (tloušťka 3 mm / 6 mm) | UL 94 | V0 / V0 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Mez kluzu | DIN EN ISO 527 | MPa | 120 |
| Prodloužení při přetržení | DIN EN ISO 527 | % | 4 |
| Modul pružnosti v tahu | DIN EN ISO 527 | MPa | 5000 |
| Tvrdost Shore | DIN EN ISO 868 | scale D | 92 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Teplota tání | ISO 11357-3 | °C | - |
| Teplota přechodu do skelného stavu | ISO 11357-3 | °C | 217 |
| Provozní teplota dlouhodobá | Průměr | °C | -30 … 170 |
| Provozní teplota krátkodobá (max.) | Průměr | °C | 210 |
| Teplota tepelné deformace | DIN EN ISO 75, Verf. A, HDT | °C | 210 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Relativní permitivita | IEC 60250 | 3,3 | |
| Dielektrický disipační faktor (50 Hz) | IEC 60250 | 0,0016 | |
| Objemový odpor | DIN EN 62631-3-1 | Ω * cm | 1015 |
| Povrchový odpor | DIN EN 62631-3-2 | Ω | 1015 |
| Srovnávací sledovací index | IEC 60112 | 150 | |
| Dielektrická pevnost | IEC 60243 | kV / mm | 35 |
