SustaPEI modrý
PEI
The Unique Amorphous High Performance Polymer
With its natural amber-coloured transparency, SustaPEI is characterised by an extremely high level of strength across a wide temperature range. At 190°C, PEI, also known by its raw material name Ultem, exhibits a tensile stress of 50 MPa. This is roughly equivalent to the level of polycarbonate at room temperature. Its flame resistance (UL94 V0), low smoke density and toxicity, and high electrical insulation capacity are also unique. Typical applications can be found in the aerospace, electrical and semiconductor industries.
brilliant blue, similar RAL 5007
rod
Characteristics
- High stiffness even at high temperatures
- Low smoke development
- Good resistance against high energy radiation
Application Examples
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 806372 | SustaPEI blue extruded | rod | rod | brilliant blue, similar RAL 5007 | Ø 65 x 3000 mm | 3 000 mm | 65 mm | |||
| No stock item (MOQ) | 806373 | SustaPEI blue extruded | rod | rod | brilliant blue, similar RAL 5007 | Ø 65 x 1000 mm | 1 000 mm | 65 mm | |||
| No stock item (MOQ) | 806708 | SustaPEI blue extruded | rod | rod | brilliant blue, similar RAL 5007 | Ø 55 x 3000 mm | 3 000 mm | 55 mm | |||
| No stock item (MOQ) | 806864 | SustaPEI blue extruded | rod | rod | brilliant blue, similar RAL 5007 | Ø 85 x 1000 mm | 1 000 mm | 85 mm | |||
| No stock item (MOQ) | 807267 | SustaPEI blue extruded | rod | rod | brilliant blue, similar RAL 5007 | Ø 40 x 1000 mm | 1 000 mm | 40 mm | |||
| No stock item (MOQ) | 807268 | SustaPEI blue extruded | rod | rod | brilliant blue, similar RAL 5007 | Ø 40 x 3000 mm | 3 000 mm | 40 mm | |||
| No stock item (MOQ) | 920148 | SustaPEI blue extruded | rod | rod | brilliant blue, similar RAL 5007 | Ø 85 x 3000 mm | 3 000 mm | 85 mm |
Technical Specifications SustaPEI blue
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hustota | DIN EN ISO 1183-1 | g / cm3 | 1,27 |
| Absorpce vody | DIN EN ISO 62 | % | 0,5 |
| Hořlavost (tloušťka 3 mm / 6 mm) | UL 94 | V0 / V0 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Mez kluzu | DIN EN ISO 527 | MPa | 110 |
| Prodloužení při přetržení | DIN EN ISO 527 | % | 12 |
| Modul pružnosti v tahu | DIN EN ISO 527 | MPa | 3100 |
| Vrubová houževnatost | DIN EN ISO 179 | kJ / m2 | 4 |
| Tvrdost Shore | DIN EN ISO 868 | scale D | 86 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Teplota tání | ISO 11357-3 | °C | - |
| Teplota přechodu do skelného stavu | ISO 11357-3 | °C | 217 |
| Tepelná vodivost | DIN 52612-1 | W / (m * K) | 0,24 |
| Tepelná kapacita | DIN 52612 | kJ / (kg * K) | 1,10 |
| Koeficient lineární teplotní roztažnosti | DIN 53752 | 10-6 / K | 45 |
| Provozní teplota dlouhodobá | Průměr | °C | -50 … 170 |
| Provozní teplota krátkodobá (max.) | Průměr | °C | 210 |
| Teplota tepelné deformace | DIN EN ISO 75, Verf. A, HDT | °C | 200 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Relativní permitivita | IEC 60250 | 3,2 | |
| Dielektrický disipační faktor (50 Hz) | IEC 60250 | 0,0015 | |
| Objemový odpor | DIN EN 62631-3-1 | Ω * cm | 1015 |
| Povrchový odpor | DIN EN 62631-3-2 | Ω | 1015 |
| Srovnávací sledovací index | IEC 60112 | 150 | |
| Dielektrická pevnost | IEC 60243 | kV / mm | 30 |
