SustaPPE GF 30 black
PPE
black
rod
Characteristics
- High stiffness
- Low creep tendency
- Low moisture absorption
- low specific weight
- high dimensional stability under heat
- Very good electrical insulation properties
- Good dimensional stability
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 630502 | SustaPPE GF 30 black extruded | rod | rod | black | Ø 60 x 2000 mm | 2 000 mm | 60 mm | |||
| No stock item (MOQ) | 930105 | SustaPPE GF 30 black extruded | rod | rod | black | Ø 60 x 3000 mm | 3 000 mm | 60 mm | |||
| No stock item (MOQ) | 930330 | SustaPPE GF 30 black extruded | rod | rod | black | Ø 60 x 1000 mm | 1 000 mm | 60 mm |
Technical Specifications SustaPPE GF 30 black
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,30 |
| Water absorption | DIN EN ISO 62 | % | 0,0 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB / HB |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 70 |
| Elongation at break | DIN EN ISO 527 | % | 3 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 4500 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 5 |
| Shore hardness | DIN EN ISO 868 | scale D | 87 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | - |
| Glass transition temperature | ISO 11357-3 | °C | 150 |
| Thermal capacity | DIN 52612 | kJ / (kg * K) | 1,30 |
| Service temperature, long term | Average | °C | -20 … 100 |
| Service temperature, short term (max.) | Average | °C | 110 |
| Heat deflection temperature | DIN EN ISO 75, Verf. A, HDT | °C | 135 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Volume resistivity | DIN EN 62631-3-1 | Ohm * cm | 1015 |
| Surface resistivity | DIN EN 62631-3-2 | Ohm | 1015 |
| Dielectric strength | IEC 60243 | kV / mm | 25 |
