Technical Specifications Maywoflamm® plus SPX
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,30 |
| Flammability | EN 45545 | HL3 (R1, R6 - 2-6mm) |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 55 |
| Elongation at break | DIN EN ISO 527 | % | 31 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 3925 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 22 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | > 220 °C |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,2 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 65 |
| Vicat softening temperature | DIN EN ISO 306, Vicat B | °C | 108 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Surface resisitivity | DIN EN 61340 | Ohm | > 1012 |
| Volume resistivity | DIN EN 61340 | Ohm | > 1012 |
