Lignostone^® L

Laminated Densified Wood

Lignostone^® – il legno lamellare densificato direttamente dall'inventore. Costituito da faggio impiallacciato (Fagus sylvatica), unito con resine sintetiche indurite sotto pressione ad alta temperatura. Oltre 100 anni di esperienza. Progettato per offrire straordinarie proprietà meccaniche e isolanti, scientificamente comprovate.

Resistente ai carichi meccanici elevati
Buon isolamento elettrico
Bassa conducibilità termica
Eccellente resistenza alle temperature
Elevata resistenza all’usura e all’abrasione
Basso coefficiente di attrito radente
Ridotto peso specifico
ottimo assorbimento dell’olio

Qualità dell’impiallacciatura

SQ = qualità standard – soddisfa i requisiti della norma IEC 61061
HQ = alta qualità – supera i requisiti della norma IEC 61061
TQ = qualità massima – supera di gran lunga i requisiti della norma IEC 61061

Chiave di identificazione

La qualità adatta per una determinata applicazione è determinata da:

Grado di compressione

L = 0.70 - 1.10 g/cm³
M = 1.10 - 1.30 g/cm³
H = 1.30 - 1.40 g/cm³

Struttura stratificata

I = stratificazione longitudinale
II = stratificazione incrociata
X = stratificazione obliqua

Spessore del rivestimento

1 = spessore dell’impiallacciatura < 2 mm
2 = spessore dell’impiallacciatura ≥ 2 mm

Tipo di resina

senza carattere = meccanica
E3 = elettrica

sheetmachined part

Characteristics

High mechanical strength at low density
High red beech veneer quality; parallel stacked
Laminated densified wood P2R according to the standard IEC 61061
Standard quality red beech veneer; parallel stacked
High red beech veneer quality; crosswise stacked
Laminated densified wood C2R according to the standard IEC 61061
Standard quality red beech veneer; crosswise stacked
Top red beech veneer quality; parallel stacked
Top red beech veneer quality; crosswise stacked
High red beech veneer quality; tangential stacked
Laminated densified wood T2R according to the standard IEC 61061
Top red beech veneer quality; tangential stacked

Industries

Application Examples

Supporti per serbatoi per metaniere

Lignostone^® è un legno lamellare densificato, appositamente sviluppato per l’uso in metaniere e gassiere. Lignostone^® coniuga un buon isolamento termico e un peso minimo con un’elevata resistenza meccanica e una temperatura di esercizio continua da -196 °C a +90 °C. Tra i componenti standard figurano ad esempio i supporti per serbatoi e unità di petroliere. Lignostone^® è omologato da LR, BV, NKK, GL, DNV, M.W.Kellog, IHI e JMU.

Lignostone^® cryogenic per impianti di propulsione a LNG

BU: Affidatevi alla qualità consolidata a livello globale: Lignostone^® cryogenic è impiegato nel settore della navigazione internazionale da decenni come isolamento criogenico in metaniere e gassiere - qui fabbricato come supporto per serbatoio su disegno del cliente.

Elementi di costruzione Lignostone^® Transformerwood

Lignostone^® Transformerwood ha un’eccellente reputazione nell’industria internazionale dei trasformatori. Il materiale combina eccellenti proprietà isolanti elettriche e termiche con un ottimo assorbimento di olio, un peso ridotto ed un’elevata resistenza. Tra i componenti standard figurano anelli di pressione, piattaforme, travi a pressione, anelli di sollevamento, segmenti di pressione ed elementi di fissaggio.

Variants

	SKU	Name	Type	Measurements
Stock item (no MOQ)	100003	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	12 (-0/+2) x 1000 x 2000 mm
Stock item (no MOQ)	100004	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	15 (-0/+2) x 1000 x 2000 mm
Stock item (no MOQ)	100005	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	20 (-0/+3) x 1000 x 2000 mm
Stock item (no MOQ)	100006	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	25 (-0/+3) x 1000 x 2000 mm
Stock item (no MOQ)	100009	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	50 (-0/+4) x 1000 x 2000 mm
Stock item (no MOQ)	100010	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	60 (-0/+4) x 1000 x 2000 mm
Stock item (no MOQ)	100012	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	80 (-0/+4) x 1000 x 2000 mm
Stock item (no MOQ)	100015	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	10 (+/-1) x 1000 x 2000 mm
Stock item (no MOQ)	100019	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	30 (+/-1) x 1000 x 2000 mm
Stock item (no MOQ)	100021	Lignostone^® L I/2-E3-SQ (0,85) pressed	sheet	40 (+/-1) x 1000 x 2000 mm

Technical Specifications Lignostone^® L I-2-E3-SQ (P1R)

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0.85
Flexural strength ¹⁾┴	ISO 178	MPa	140
Modulus of elasticity in flexion ¹⁾┴	IEC 61061	MPa	11000
Compressive strength ┴	ISO 604	MPa	100
Compressive strength II	ISO 604	MPa	55
Shear strength II	IEC 61061	MPa	8

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0.22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	130

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	30
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	15
Electric strength 90°C under oil II	IEC 61061	kV/25mm	70
Relative permittivity (50 Hz)	IEC 60250	ε_r	3.7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0.01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L II-2-E3-SQ

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0.95
Flexural strength ┴	IEC 61061	MPa	110
Modulus of elasticity in flexion ┴	IEC 61061	MPa	9000
Compressive strength ┴	ISO 604	MPa	200
Compressive strength II	ISO 604	MPa	70
Shear strength II	IEC 61061	MPa	10

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0.22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	140

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	15
Electric strength 90°C under oil II	IEC 61061	kV/25mm	70
Relative permittivity (50 Hz)	IEC 60250	ε_r	3.7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0.01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L II-2-E3-HQ

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0.95
Flexural strength ┴	IEC 61061	MPa	110
Modulus of elasticity in flexion ┴	IEC 61061	MPa	9000
Compressive strength ┴	ISO 604	MPa	200
Compressive strength II	ISO 604	MPa	70
Shear strength II	IEC 61061	MPa	10

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0.22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	140

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	17
Electric strength 90°C under oil II	IEC 61061	kV/25mm	80
Relative permittivity (50 Hz)	IEC 60250	ε_r	3.7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0.01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L I-2-E3-HQ (P2R)

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0,95
Flexural strength ¹⁾┴	IEC 61061	MPa	150
Modulus of elasticity in flexion ¹⁾┴	IEC 61061	MPa	12000
Compressive strength ┴	ISO 604	MPa	120
Compressive strength II	ISO 604	MPa	70
Shear strength II	IEC 61061	MPa	10

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0,22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	130

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	17
Electric strength 90°C under oil II	IEC 61061	kV/25mm	80
Relative permittivity (50 Hz)	IEC 60250	ε_r	3,7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0,01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L I-2-E3-TQ

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0.95
Flexural strength ¹⁾┴	IEC 61061	MPa	150
Modulus of elasticity in flexion ¹⁾┴	IEC 61061	MPa	12000
Compressive strength ┴	ISO 604	MPa	120
Compressive strength II	ISO 604	MPa	70
Shear strength II	IEC 61061	MPa	10

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0.22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	130

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	18
Electric strength 90°C under oil II	IEC 61061	kV/25mm	90
Relative permittivity (50 Hz)	IEC 60250	ε_r	3.7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0.01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L II-2-E3-TQ

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0,95
Flexural strength ┴	IEC 61061	MPa	110
Modulus of elasticity in flexion ┴	IEC 61061	MPa	9000
Compressive strength ┴	ISO 604	MPa	200
Compressive strength II	ISO 604	MPa	70
Shear strength II	IEC 61061	MPa	10

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0,22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	140

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	18
Electric strength 90°C under oil II	IEC 61061	kV/25mm	90
Relative permittivity (50 Hz)	IEC 60250	ε_r	3,7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0,01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L I-2-E3-SQ (P2R)

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0,95
Flexural strength ¹⁾┴	IEC 61061	MPa	150
Modulus of elasticity in flexion ¹⁾┴	IEC 61061	MPa	12000
Compressive strength ┴	ISO 604	MPa	120
Compressive strength II	ISO 604	MPa	70
Shear strength II	IEC 61061	MPa	10

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0,22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	130

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	15
Electric strength 90°C under oil II	IEC 61061	kV/25mm	70
Relative permittivity (50 Hz)	IEC 60250	ε_r	3,7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0,01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L I-2-E3-HQ (P1R)

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0.85
Flexural strength ¹⁾┴	IEC 61061	MPa	140
Modulus of elasticity in flexion ¹⁾┴	IEC 61061	MPa	11000
Compressive strength ┴	ISO 604	MPa	100
Compressive strength II	ISO 604	MPa	55
Shear strength II	IEC 61061	MPa	8

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0,22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	130

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	17
Electric strength 90°C under oil II	IEC 61061	kV/25mm	80
Relative permittivity (50 Hz)	IEC 60250	ε_r	3,7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0,01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L X-2-E3-HQ

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0.95
Flexural strength ¹⁾┴	ISO 178	MPa	130
Modulus of elasticity in flexion ¹⁾┴	ISO 178	MPa	11 000
Compressive strength ┴	ISO 604	MPa	120
Shear strength II	IEC 61061	MPa	10

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0.22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	130

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	17
Electric strength 90°C under oil II	IEC 61061	kV/25mm	80
Relative permittivity (50 Hz)	IEC 60250	ε_r	3.7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0.01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Technical Specifications Lignostone^® L II-2-E3-HQ (C1R)

	Test Method	Unit	Guideline Value
Density	IEC 61061	g / cm³	0.85
Flexural strength ┴	IEC 61061	MPa	90
Modulus of elasticity in flexion ┴	IEC 61061	MPa	8000
Compressive strength ┴	ISO 604	MPa	180
Compressive strength II	ISO 604	MPa	60
Shear strength II	IEC 61061	MPa	8

	Test Method	Unit	Guideline Value
Thermal conductivity	DIN 52612	W/m K	0.22
Operating temperature continuous	DIN 7707	°C	105
Temperature limit when drying	DIN 7707	°C	140

	Test Method	Unit	Guideline Value
Oil absorption	IEC 61061	%	25
Moisture content	IEC 61061	%	5

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 61061	kV / mm	17
Electric strength 90°C under oil II	IEC 61061	kV/25mm	80
Relative permittivity (50 Hz)	IEC 60250	ε_r	3.7
Dielectric loss factor (50 Hz)	IEC 60250	tan δ	0.01
Specific volume resistance	IEC 60093	Ω x cm	10¹²

Downloads

Technical Data Sheet Lignostone® L I-2-E3-SQ (P1R)

Technical Data Sheet Lignostone® L II-2-E3-SQ

Technical Data Sheet Lignostone® L II-2-E3-HQ

Technical Data Sheet Lignostone® L I-2-E3-HQ (P2R)

Technical Data Sheet Lignostone® L I/2-E3-TQ

Technical Data Sheet Lignostone® L II/2-E3-TQ

Technical Data Sheet Lignostone® L I/2-E3-SQ (P2R)

Technical Data Sheet Lignostone® L I/2-E3-HQ (P1R)

Technical Data Sheet Lignostone® L X-2-E3-HQ

Technical Data Sheet Lignostone® L II/2-E3-HQ (C1R)

Product Handling Information Sheet Lignostone® L I-2-E3-SQ (P1R)

Product Handling Information Sheet Lignostone® L II-2-E3-SQ

Product Handling Information Sheet Lignostone® L II-2-E3-HQ

Product Handling Information Sheet Lignostone® L I-2-E3-HQ (P2R)

Product Handling Information Sheet Lignostone® L I/2-E3-TQ

Product Handling Information Sheet Lignostone® L II/2-E3-TQ

Product Handling Information Sheet Lignostone® L I/2-E3-SQ (P2R)

Product Handling Information Sheet Lignostone® L I/2-E3-HQ (P1R)

Product Handling Information Sheet Lignostone® L X-2-E3-HQ

Product Handling Information Sheet Lignostone® L II/2-E3-HQ (C1R)

Brochure - Folder Industrial Transformatoren web final - EN

Brochure - Project Report Gas tankers with Lignostone tank supports - EN

Flyer - Oil and Gas Gloucester - EN

Contact

Oggetto

Saluto *

Nome *

Cognome *

Organizzazione *

Dipartimento

URL aziendale

La Vostra Industria *

Email *

Numero di telefono *

Indirizzo *

CAP *

Città *

Paese *

Stato

Messaggio *

Sì, vorrei ricevere la newsletter via e-mail con informazioni sull'azienda e sui prodotti di Röchling Industrial.

Caricamento PDF (1)

Caricamento PDF (2)

Caricamento PDF (3)

Caricamento immagine (jpg, png, bmp) (1)

Caricamento immagine (jpg, png, bmp) (2)

Caricamento immagine (jpg, png, bmp) (3)

Hai la possibilità di allegare file al tuo messaggio. I file devono essere
documenti JPEG, PNG, BMP, PDF. Assicurati di aggiungere solo file fino a 8 MB

Information on data protection can be found here.

URL della pagina

Captcha

Rinnovare
si prega di inserire il Captcha

Lignostone® L

Laminated Densified Wood

Qualità dell’impiallacciatura

Chiave di identificazione

Characteristics

Industries

Application Examples

Supporti per serbatoi per metaniere

Lignostone® cryogenic per impianti di propulsione a LNG

Elementi di costruzione Lignostone® Transformerwood

Variants

Technical Specifications Lignostone® L I-2-E3-SQ (P1R)

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L II-2-E3-SQ

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L II-2-E3-HQ

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L I-2-E3-HQ (P2R)

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L I-2-E3-TQ

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L II-2-E3-TQ

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L I-2-E3-SQ (P2R)

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L I-2-E3-HQ (P1R)

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L X-2-E3-HQ

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Technical Specifications Lignostone® L II-2-E3-HQ (C1R)

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Downloads

Technical Data Sheet

Product Handling (including processing instructions, storage instructions and general safety instructions)

Declaration of Compliance

Additional Documents

Contact

Refine Results

Usage of Cookies

Share this page:

Select Website

Gruppo Röchling

Automotive

Industrial

Medical

Lavora con noi

Lignostone^® L

Lignostone^® cryogenic per impianti di propulsione a LNG

Elementi di costruzione Lignostone^® Transformerwood

Technical Specifications Lignostone^® L I-2-E3-SQ (P1R)

Technical Specifications Lignostone^® L II-2-E3-SQ

Technical Specifications Lignostone^® L II-2-E3-HQ

Technical Specifications Lignostone^® L I-2-E3-HQ (P2R)

Technical Specifications Lignostone^® L I-2-E3-TQ

Technical Specifications Lignostone^® L II-2-E3-TQ

Technical Specifications Lignostone^® L I-2-E3-SQ (P2R)

Technical Specifications Lignostone^® L I-2-E3-HQ (P1R)

Technical Specifications Lignostone^® L X-2-E3-HQ

Technical Specifications Lignostone^® L II-2-E3-HQ (C1R)