Technical Specifications Maywogreen PLA BIO (deg)
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,32 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Elongation at break | DIN EN ISO 527 | % | 21 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 2555 |
| Tensile strength | DIN EN ISO 527 | MPa | 36 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 7 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | >130 °C |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Surface resisitivity | DIN EN 61340 | Ohm | > 1012 |
| Volume resistivity | DIN EN 61340 | Ohm | > 1012 |
