US

Please select a language / region

 

Sustarin® C brown

POM-C

mahogany brown, similar RAL 8016chestnut brown, similar RAL 8015fawn brown, similar RAL 8007
sheetrod
QR-Code

Characteristics

  • Chemical resistance
  • Low moisture absorption
  • High abrasion resistance
  • ideal combination of tensile strength, stiffness and impact strength
  • Low creep tendency
  • Good machinability
  • favourable electric and dielectric behaviour
  • Good dimensional stability
  • Good sliding properties

Application Examples

ROV components

Remote Offshore Vehicles (ROVs) are continuous being designed to operate in ever increasing depths. To aid this, we supply numerous corrosion resistant, key components used to assemble an ROV. This includes the naturally buoyant Polystone® P and Polystone® D used for the side frames. While electronics boxes made from Sustarin® C have replaced metallic components, thanks to the materials lower weight and corrosion resistance. With the same corrosion resistance, low weight and excellent impact resistance leading to the use of Sustamid® 6G for thruster nozzles and ROV buckets.

Moulding drum for bread rolls

Röchling materials contribute to the efficiency of processes in the industrial production of bread rolls: made of Sustarin® C, the chamber drum rotates in the opposite direction of the moulding drum, thereby forming the dough pieces.

Subsea (Christmas) tree end caps

During drilling the delicate wellhead is covered by a removal cap prior to installation/after removal of the subsea tree. As these are installed by ROV, weight is of a key concern. With thermoplastics like Sustarin® C, SustaPVDF® and SustaPEEK® offering significant weight reduction over traditional metallic components. Further benefits include the natural corrosion resistance of the material, as well as the thermal insulation properties and chemical resistance to the anti-fouling fluid.

Rods

Rods made of Sustarin® C.

Subsea connectors

As subsea equipment becomes more complicated, it is imperative that connectors both electrical & communication are machined and produced using material of the highest quality. SustaPEEK®, SustaPEI® and Sustarin® C are the optimum solution with good electrical resistance, low moisture absorption, dimensional stability and impact resistance for Dry-Mate and Wet-Met systems.

SKUNameTypeTypeColorMeasurementsLengthWidthThicknessHeight
No stock item (MOQ)
606670Sustarin® C brown extruded sheet sheet mahogany brown, similar RAL 801650 x 620 x 1000 mm 1,000 mm 620 mm 50 mm
No stock item (MOQ)
720976Sustarin® C brown extruded rod rod mahogany brown, similar RAL 8016Ø 90 x 3000 mm 3,000 mm 90 mm
No stock item (MOQ)
720978Sustarin® C brown extruded rod rod mahogany brown, similar RAL 8016Ø 90 x 1000 mm 1,000 mm 90 mm
No stock item (MOQ)
800844Sustarin® C brown extruded rod rod chestnut brown, similar RAL 8015Ø 20 x 3000 mm 3,000 mm 20 mm
No stock item (MOQ)
800877Sustarin® C brown extruded rod rod chestnut brown, similar RAL 8015Ø 12 x 3000 mm 3,000 mm 12 mm
No stock item (MOQ)
801052Sustarin® C brown extruded rod rod chestnut brown, similar RAL 8015Ø 15 x 3000 mm 3,000 mm 15 mm
No stock item (MOQ)
921652Sustarin® C brown extruded sheet sheet fawn brown, similar RAL 800740 x 620 x 3000 mm 3,000 mm 620 mm 40 mm
No stock item (MOQ)
931949Sustarin® C brown extruded rod rod chestnut brown, similar RAL 8015Ø 20 x 1000 mm 1,000 mm 20 mm
No stock item (MOQ)
934782Sustarin® C brown extruded sheet sheet mahogany brown, similar RAL 801680 x 620 x 2000 mm 2,000 mm 620 mm 80 mm
No stock item (MOQ)
934784Sustarin® C brown extruded sheet sheet mahogany brown, similar RAL 801650 x 620 x 2000 mm 2,000 mm 620 mm 50 mm

Technical Specifications Sustarin® C brown

Test MethodUnitGuideline Value
DensityDIN EN ISO 1183-1g / cm31,41
Water absorptionDIN EN ISO 62%0,2
Flammability (Thickness 3 mm / 6 mm)UL 94HB / HB
Test MethodUnitGuideline Value
Yield stressDIN EN ISO 527MPa67
Elongation at breakDIN EN ISO 527%30
Tensile modulus of elasticityDIN EN ISO 527MPa2800
Notched impact strengthDIN EN ISO 179kJ / m26
Shore hardnessDIN EN ISO 868scale D81
Test MethodUnitGuideline Value
Melting temperatureISO 11357-3°C165
Thermal conductivityDIN 52612-1W / (m * K)0,31
Thermal capacityDIN 52612kJ / (kg * K)1,50
Coefficient of linear thermal expansionDIN 5375210-6 / K110
Service temperature, long termAverage°C-50 … 100
Service temperature, short term (max.)Average°C140
Heat deflection temperatureDIN EN ISO 75, Verf. A, HDT°C110
Test MethodUnitGuideline Value
Dielectric constantIEC 602503,8
Dielectric dissipation factor (50 Hz)IEC 602500,002
Volume resistivityDIN EN 62631-3-1Ω * cm1013
Surface resistivityDIN EN 62631-3-21013
Comparative tracking indexIEC 60112600
Dielectric strengthIEC 60243kV / mm40

Contact

You have the option of attaching files to your message. The files have to be JPEG, PNG, BMP, PDF-documents. Please be sure that you only add files up to 8 MB

Information on data protection can be found here.

Renew
 
Search

Refine Results

Contact

Share

Newsletter Registration

Select Website

Roechling_Industrial_Banner.jpg
Plastics for technical Applications

Industrial