Maywodec® ABS/PMMA

ABS - PMMA

Maywodec^® ABS/PMMA has a film lamination of deep-drawing quality with printed decorative film or trasparent PMMA film.

Characteristics

UV-resistant
Printed decorative foil or crystal-clear foil available

Industries

Application Examples

Superfici decorative in Maywodec®

Le lastre ABS realizzate in Maywodec^® (ABS + PMMA) sono disponibili in quasi tutti i design richiesti, dall’effetto legno all’effetto metallo e, grazie all’elevata resistenza alle radiazioni UV, sono disponibili per l’utilizzo in ambienti esterni a lungo termine.

Technical Specifications Maywodec® ABS-PMMA

General properties

	Test Method	Unit	Guideline Value
Density	DIN EN ISO 1183-1	g / cm³	1,10
Water absorption	DIN EN ISO 62	%	0,3
Flammability (Thickness 1,5mm / 3 mm)	UL 94		HB

Mechanical properties

	Test Method	Unit	Guideline Value
Yield stress	DIN EN ISO 527	MPa	50
Elongation at break	DIN EN ISO 527	%	55
Tensile modulus of elasticity	DIN EN ISO 527	MPa	2085
Notched impact strength	DIN EN ISO 179	kJ / m²	23
Rockwell hardness	DIN EN ISO 2039-2	scale R	80

Thermal properties

	Test Method	Unit	Guideline Value
Melting temperature	ISO 11357-3	°C	>180°C
Thermal conductivity	DIN 52612-1	W / (m * K)	0,17
Coefficient of linear thermal expansion	DIN 53752	10^-6 / K	90
Service temperature, long term	Average	°C	85
Service temperature, short term (max.)	Average	°C	100
Vicat softening temperature	DIN EN ISO 306, Vicat B	°C	102