Technical Specifications Polystone® P MG - ASTM
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | ASTM D792 | g / cm3 | 0.91 |
| Water Absorption | ASTM D570 | % | <0.1 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hardness | ASTM D2240 | Shore D | 72 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 4900 |
| Elongation at Break | ASTM D638 | % | >400 |
| Flexural Strength | ASTM D790 | psi | 200000 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 1.0 |
| Coefficient of Friction, Dynamic | 0.25-0.28 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| CTE, linear | ASTM D696 | in/in/°F | 6x10-5 |
| Melting Point | °F | 323 | |
| Maximum Service Temperature, Air | °F | 180 | |
| Heat Deflection Temperature 264psi | ASTM D648 | °F | 210 |
| Flammability, UL94 | 1/8 inch | HB |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Surface resistivity | ASTM D257 | Ohm/cm | >1014 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| FDA | Yes | ||
| USP Class VI | ASTM Certified | Yes |
