Polystone® M Virgin HCL Conductive Black
PE — PE-UHMW - PE 1000
Technical Specifications Polystone® M Virgin HCL Conductive Black
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Specific Gravity | ASTM D792 | g / cm3 | 0.935 |
| Water Absorption | ASTM D570 | % | ≤0.01 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Wear resistance | Sand-slurry | 100 | |
| Hardness | ASTM D785 | Shore D | 63-69 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 3000 |
| Tensile Modulus | ASTM D638 | psi | 100,000 |
| Elongation at Break | ASTM D638 | % | ≥290 |
| Flexural Strength | ASTM D790 | psi | 3200 |
| Compressive Strength | ASTM D695 | psi | 2900 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | No Break |
| Coefficient of Friction, Dynamic | 0.10-0.15 | ||
| Coefficient of Friction, Static | 0.15-0.2 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| CTE, linear | ASTM D696 | in/in/°F | 1.1x10-4 |
| Melting Point | ASTM D3418 | °F | 275 |
| Maximum Service Temperature, Air | °F | 180 | |
| Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 108 |
| Flammability, UL94 | 1/8 inch | HB |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Surface resistivity | ASTM D257 | Ω/sq | 101 - 105 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| FDA | No | ||
| NSF | No | ||
| USDA | No |
