Matrox® AST UV-stabilized - ASTM
PE — PE-UHMW - PE 1000
Characteristics
- Low surface energy
- Corrosion resistant
- Very good abrasion and wear resistance
- UV-resistant
Industries
Technical Specifications Matrox® AST UV-stabilized - ASTM
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | ASTM D792 | g / cm3 | 0.93 |
| Water Absorption | ASTM D570 | % | <0.01 |
| Carbon Black Content | ISO6964 | % | n/a |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Tensile Strength at Yield | ASTM D638 | psi | 2900 |
| Hardness | ASTM D2240 | Shore D | 63 |
| Tensile Modulus | ASTM D638 | psi | 84000 |
| Tensile Elongation | ASTM D638 | % | >250 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting Point | °F | 275 | |
| Maximum Service Temperature, Air | °F | 180 | |
| Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 174 |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-4 | 1.11 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | ASTM D150 | 1MHz | 2.3 |
| Dielectric strength | ASTM D149 | 45 | |
| Surface resistivity | ASTM D257 | Ohm/cm | >1012 |
