SustaPEEK black - ASTM
PEEK
Characteristics
- Flame retardant
- Self-extinguishing
- Low smoke density
- Good dimensional stability
Technical Specifications SustaPEEK black - ASTM
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | ASTM D792 | g / cm3 | 1.32 |
| Water Absorption 24 hours | ASTM D570 | % | 0.1 |
| Dissipation Factor | ASTM D150 | 1MHz | 0.003 |
| Water Absorption Saturation | ASTM D570 | % | 0.5 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hardness | ASTM D2240 | Shore D | 85 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 16000 |
| Tensile Modulus | ASTM D638 | psi | 500000 |
| Elongation at Break | ASTM D638 | % | 20 |
| Flexural Strength | ASTM D790 | psi | 25000 |
| Flexural Modulus | ASTM D790 | psi | 600000 |
| Compressive Strength | ASTM D695 | psi | 18000 |
| Rockwell Hardness | ASTM D785 | M | 105 |
| Rockwell Hardness | ASTM D785 | R | 126 |
| Shear Strength | ASTM D732 | psi | 7700 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 1.2 |
| Coefficient of Friction, Dynamic | 0.4 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Thermal Conductivity | in/hr/ft2 /°F | 1.73 | |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 2.6 |
| Melting Point | °F | 630 | |
| Continuous Service Temperature, Air | °F | 480 | |
| Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 320 |
| Deflection Temperature at 1.8Mpa (66psi) | ASTM D648 | °F | 360 |
| Flammability, UL94 | 1/8 inch | V-0 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | ASTM D150 | 1MHz | 3.3 |
| Dielectric strength | ASTM D149 | V/mil | 480 |
| Surface resistivity | ASTM D257 | Ω/cm | 1013 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| FDA | Yes | ||
| NSF | No | ||
| USDA | Yes |
