Sustanat® PC GF 20 - ASTM
PC
Characteristics
- High heat deflection temperature
- Self-extinguishing
- Good dimensional stability
Technical Specifications Sustanat® PC GF 20 - ASTM
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | V0 / V0 | |
| Density | ASTM D792 | g / cm3 | 1.35 |
| Water Absorption 24 hours | ASTM D570 | % | 0.16 |
| Dissipation Factor | ASTM D150 | 1MHz | 0.0009 |
| Water Absorption Saturation | ASTM D570 | % | 0.29 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hardness | ASTM D2240 | Shore D | 87 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 16000 |
| Tensile Modulus | ASTM D638 | psi | 860000 |
| Elongation at Break | ASTM D638 | % | 6 |
| Flexural Strength | ASTM D790 | psi | 19000 |
| Flexural Modulus | ASTM D790 | psi | 800000 |
| Compressive Strength | ASTM D695 | psi | 16000 |
| Rockwell Hardness | ASTM D785 | 91 | |
| Rockwell Hardness | ASTM D785 | R | 122 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 2 |
| Coefficient of Friction, Dynamic | 0.22 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Thermal Conductivity | in/hr/ft2 /°F | 1.47 | |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 1.5 |
| Melting Point | ASTM D789 | °F | 330 |
| Continuous Service Temperature, Air | °F | 260 | |
| Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 295 |
| Deflection Temperature at 1.8Mpa (66psi) | ASTM D648 | °F | 298 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | ASTM D150 | 1MHz | 3.13 |
| Dielectric strength | ASTM D149 | V/mil | 490 |
| Surface resistivity | ASTM D257 | Ω/cm | >1013 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| FDA | No | ||
| NSF | No | ||
| USDA | No |
