Sustamid® 6G MO (Cast Nylon MoS2 Filled) - ASTM
PA — PA 6 G
Characteristics
- High rigidity
- High toughness even at high temperatures
- UV-resistant
Technical Specifications Sustamid® 6G MO (Cast Nylon MoS2 Filled) - ASTM
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | ASTM D792 | g / cm3 | 1.15 |
| Water Absorption | ASTM D570 | % | 7.0 |
| Water Absorption 24 hours | ASTM D570 | % | 0.7 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hardness | ASTM D2240 | Shore D | 80 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 12500 |
| Tensile Modulus | ASTM D638 | psi | 460000 |
| Elongation at Break | ASTM D638 | % | 35 |
| Flexural Strength | ASTM D790 | psi | 16000 |
| Flexural Modulus | ASTM D790 | psi | 450000 |
| Compressive Strength | ASTM D695 | psi | 13000 |
| Rockwell Hardness | ASTM D785 | 80 | |
| Rockwell Hardness | ASTM D785 | R | 117 |
| Shear Strength | ASTM D732 | psi | 11000 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 0.6 |
| Coefficient of Friction, Dynamic | 0.22 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Thermal Conductivity | in/hr/ft2 /°F | 1.7 | |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 4.0 |
| Melting Point | °F | 430 | |
| Continuous Service Temperature, Air | °F | 200 | |
| Flammability, UL94 | 1/8 inch | HB | |
| Deflection Temperature at 264psi | ASTM D648 | °F | 200 |
| Deflection Temperature at 66psi | ASTM D648 | °F | 370 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | ASTM D150 | 1MHz | 3.8 |
| Dielectric strength | ASTM D149 | V/mil | 410 |
| Surface resistivity | ASTM D257 | Ω/cm | >1012 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| FDA | No | ||
| NSF | No | ||
| USDA | No |
