Durostone® UPR S19

GFK-UP

threaded rodscrew nut

Characteristics

High mechanical and dielectric strength
Vinyl ester (VE) thermoset reinfored with e-glass fabric

Industries

Application Examples

Durostone® fasteners - Construction sector

Durostone^® fasteners have a very low thermal conductivity compared with steel, which means they can be used to prevent cold bridges in the construction sector, such as when mounting façades. All Durostone^® grades have a thermal conductivity of 0.3 W/mK, putting them on a par with mineral wool, which is used as an insulating material in construction.

Durostone® fasteners in the offshore sector

In offshore environments, oxidation of fasteners can rapidly happen, unless costly titanium or super duplex grades are used. An alternative to these are our Durostone^® fasteners, which are not affected by oxidative degradation like steel. Durostone^® fasteners offer high strength and are naturally corrosion resistant, as well as highly weather and chemical resistant, but also only weight approximately 75% less than an equivalent sized steel fastener.

Durostone® fasteners in the field of hydraulic engineering and port construction

Durostone^® fasteners are particularly resistant to corrosive salt water and are very UV and weather-resistant. They are used in hydraulic engineering and harbour construction applications such as sea water desalination plants.

Durostone® fasteners - high-voltage direct current transmission systems

Durostone^® fasteners are electrically insulating and anti-magnetic. Some qualities are also part-discharge-free up to high electrical field strengths, particularity creep-resilient and flame-retardant. This will support the longevity of high-voltage direct current transmission systems.

Durostone® fasteners - galvanic operations

Durostone^® fasteners - Our Durostone^® fasteners are particularly resilient against aggressive media and gases, and therefore particularly suitable for use in galvanic operations.

Durostone® fasteners - Nacelle construction

With their high corrosion resistance and electrical properties, our Durostone^® fastener offer a long service life, while their low density (between 1.9 and 2 g/cm³) makes it possible to save weight when building your nacelles.

Variants

Show product in Webshop

	SKU	Name	Type	Type	Measurements	Length	Width	Thickness	Height
No stock item (MOQ)	319157	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 16 x 1.900 mm	1,900 mm		16 mm
No stock item (MOQ)	319158	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 12 x 1.900 mm	1,900 mm		12 mm
Stock item (no MOQ)	319958	Durostone® UPR S19 pressed	Square	Square	M 16 SW=32 H=D	32 mm	32 mm	16 mm	16 mm
Stock item (no MOQ)	319959	Durostone® UPR S19 pressed	Square	Square	M 16 SW=24 H=D	24 mm	24 mm	16 mm	16 mm
Stock item (no MOQ)	333595	Durostone® UPR S19 pressed	Square	Square	M 8 SW=13 H=D	13 mm	13 mm	8 mm	8 mm
No stock item (MOQ)	337181	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 8 x 1.900 mm	1,900 mm		8 mm
No stock item (MOQ)	337182	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 10 x 1.900 mm	1,900 mm		10 mm
No stock item (MOQ)	337183	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 12 x 1.900 mm	1,900 mm		12 mm
No stock item (MOQ)	337184	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 16 x 1.900 mm	1,900 mm		16 mm
Stock item (no MOQ)	337185	Durostone® UPR S19 pressed	Square	Square	M 10 SW=17 H=D	17 mm	17 mm	10 mm	10 mm
Stock item (no MOQ)	337186	Durostone® UPR S19 pressed	Square	Square	M 12 SW=19 H=D	19 mm	19 mm	12 mm	12 mm
No stock item (MOQ)	337329	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 20 x 1.900 mm	1,900 mm		20 mm
Stock item (no MOQ)	337330	Durostone® UPR S19 pressed	Square	Square	M 20 SW=30 H=D	30 mm	30 mm	20 mm	20 mm
No stock item (MOQ)	384578	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 10 x 1.900 mm	1,900 mm		10 mm
No stock item (MOQ)	414160	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 8 x 1.900 mm	1,900 mm		8 mm
Stock item (no MOQ)	414297	Durostone® UPR S19 pressed	Square	Square	M 12 SW=19 H=D	19 mm	19 mm	12 mm	12 mm
Stock item (no MOQ)	414300	Durostone® UPR S19 pressed	Square	Square	M 16 SW=24 H=D	24 mm	24 mm	16 mm	16 mm
Stock item (no MOQ)	414303	Durostone® UPR S19 pressed	Square	Square	M 10 SW=17 H=D	17 mm	17 mm	10 mm	10 mm
No stock item (MOQ)	420773	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 20 x 1.900 mm	1,900 mm		20 mm
No stock item (MOQ)	420774	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 24 x 1.900 mm	1,900 mm		24 mm
No stock item (MOQ)	434954	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 16 x 1.900 mm	1,900 mm		16 mm
No stock item (MOQ)	453183	Durostone® UPR S19 pressed	threaded rod	threaded rod	M 8 x 1.900 mm	1,900 mm		8 mm
Stock item (no MOQ)	468577	Durostone® UPR S19 pressed	Square	Square	M 8 SW=13 H=D	13 mm	13 mm	8 mm	8 mm
Stock item (no MOQ)	468580	Durostone® UPR S19 pressed	Square	Square	M 10 SW=17 H=D	17 mm	17 mm	10 mm	10 mm
Stock item (no MOQ)	468581	Durostone® UPR S19 pressed	Square	Square	M 16 SW=24 H=D	24 mm	24 mm	16 mm	16 mm
Stock item (no MOQ)	468583	Durostone® UPR S19 pressed	Square	Square	M 12 SW=19 H=D	19 mm	19 mm	12 mm	12 mm
Stock item (no MOQ)	479934	Durostone® UPR S19 pressed	Square	Square	M 24 SW=36 H=D	36 mm	36 mm	24 mm	24 mm

Technical Specifications Durostone® UPR S19

Mechanical properties

	Test Method	Unit	Guideline Value
Density	ISO 1183	g / cm³	1,95
Flexural strength ┴	ISO 178	MPa	470
Modulus of elasticity in flexion ┴	ISO 178	MPa	25000
Compressive strength ┴	ISO 604	MPa	450
Compressive strength II	ISO 604	MPa	250
Tensile strength II	ISO 527	MPa	400
Impact strength II (Charpy)	ISO 179	kJ / m²	200

Thermal properties

	Test Method	Unit	Guideline Value
Temperature index	IEC 60216	T.I.	155
Insulation class	IEC 60085	/	F

Physical properties

	Test Method	Unit	Guideline Value
Water absorption (4mm thickness)	ISO 62	%	0,1

Dielectrical properties

	Test Method	Unit	Guideline Value
Electric strength 90°C under oil ┴	IEC 60243	kV / mm	15
Electric strength 90°C under oil II	IEC 60243	kV/25mm	75
Relative permittivity (50 Hz)	IEC 60250	ε_r	≈ 5
Specific surface resistance	IEC 60093	Ohm	10¹⁰
Comparative tracking index	IEC 60112	CTI	600

Brochure - Durostone fasteners - ES EN

Brochure - Durostone fasteners - FR EN

Flyer - Oil and Gas Gloucester - EN

Durostone® UPR S19

GFK-UP

Characteristics

Industries

Application Examples

Durostone® fasteners - Construction sector

Durostone® fasteners in the offshore sector

Durostone® fasteners in the field of hydraulic engineering and port construction

Durostone® fasteners - high-voltage direct current transmission systems

Durostone® fasteners - galvanic operations

Durostone® fasteners - Nacelle construction

Variants

Technical Specifications Durostone® UPR S19

Mechanical properties

Thermal properties

Physical properties

Dielectrical properties

Downloads

Technical Data Sheet

Product Handling (including processing instructions, storage instructions and general safety instructions)

Additional Documents

Contact

Refine Results

Share this page:

Select Website

Röchling Group

Automotive

Industrial

Medical

Career