Sustamid® 66 GF 30 - ASTM
PA — PA 66
Characteristics
- Good dimensional stability
- High hardness and rigidity
- Very high heat deflection temperature
- high absorption of moisture of up to 2.7 % in standard atmosphere
Technical Specifications Sustamid® 66 GF 30 - ASTM
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | ASTM D792 | g / cm3 | 1.34 |
| Water Absorption 24 hours | ASTM D570 | % | 0.7 |
| Dissipation Factor | ASTM D150 | 1MHz | 0.018 |
| Water Absorption Saturation | ASTM D570 | % | 5.5 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Tensile Strength at yield 73°F | ASTM D638 | psi | 12,200 |
| Tensile Modulus | ASTM D638 | psi | 1,200,000 |
| Elongation at Break | ASTM D638 | % | 6 |
| Flexural Strength | ASTM D790 | psi | 26,000 |
| Flexural Modulus | ASTM D790 | psi | 1,100,000 |
| Compressive Strength | ASTM D695 | psi | 19,000 |
| Rockwell Hardness | ASTM D785 | 101 | |
| Rockwell Hardness | ASTM D785 | R | 122 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 1.5 |
| Coefficient of Friction, Dynamic | 0.31 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Thermal Conductivity | in/hr/ft2 /°F | 2 | |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 1.7 |
| Melting Point | ASTM D789 | °F | 500 |
| Continuous Service Temperature, Air | °F | 220 | |
| Flammability, UL94 | 1/8 inch | HB | |
| Deflection Temperature at 264psi | ASTM D648 | °F | 380 |
| Deflection Temperature at 66psi | ASTM D648 | °F | 485 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | ASTM D150 | 1MHz | 3.5 |
| Dielectric strength | ASTM D149 | V/mil | 350 |
| Surface resistivity | ASTM D257 | Ohm/cm | >1013 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| FDA | No | ||
| NSF | No | ||
| USDA | No |
