Please select a language / region


Matrox® FC natural

PE — PE-UHMW - PE 1000

Matrox® is outstanding for its extremely low coefficient of friction and high wear resistance and so optimally meets requirements for the lining of silos and bunkers.



  • FDA Approval
  • High abrasion resistance
  • Low moisture absorption

Application Examples

Bunker and silo linings

In bunkers and silos large drop heights and the hard impact of the bulk goods cause extreme wear on the lining. The hopper-shaped outlet leads to core and mass flow problems. Safety requirements or the need to handle food, for instance, place further demands on the selection of the appropriate lining materials.

Linings for mine vehicles

Wherever bulk goods are transported, stored or further processed, wear and caking cause standstills in the work process. The flow of materials stops and wear destroys the body of the dumper. Our material Matrox® combines the best surface friction with maximum abrasion resistance to improve the flow rating of your bulk goods and prevent abrasion even in the harshest conditions.

Highly wear-resistant linings

We have developed a lining system for supply silos of biogas facilities specifically for the biogas sector: Our Matrox®-linings permanently prevent corrosion and wear. The material offers high chemicals resilience, outstanding wear resilience and excellent sliding properties that promote material flow.

Lining material for bulk goods in the food industry

With FDA approval for use with food, our material Matrox® FC can be used as a lining material for bulk goods in the food industry.

Matrox® wagon linings

The use of freight wagons for a wide variety of bulk materials demands a balance between protecting against wear and minimising friction. For hopper, saddle or standard type wagons, we recommend our Matrox® material. Matrox® combines the best surface friction with the highest abrasion resistance and thus promotes the optimal material flow of your bulk goods.


Stock item (no MOQ)
463446Matrox® FC natural extruded fastening fastening naturalØ 38,6 (-0/+0,2) x 9 (-0/+0,2) mm 9 mm 38.6 mm
No stock item (MOQ)
411501Matrox® FC natural pressed sheet sheet natural3.000 x 2.000 x 10 mm 3,000 mm 2,000 mm 10 mm
No stock item (MOQ)
459016Matrox® FC natural pressed sheet sheet natural2.000 x 1.000 x 70 mm 2,000 mm 1,000 mm 70 mm
No stock item (MOQ)
465951Matrox® FC natural pressed sheet sheet natural6.000 x 2.500 x 13 mm 6,000 mm 2,500 mm 13 mm
No stock item (MOQ)
465953Matrox® FC natural pressed sheet sheet natural6.000 x 2.500 x 16 mm 6,000 mm 2,500 mm 16 mm

Technical Specifications Matrox® FC natural extruded

Test MethodUnitGuideline Value
DensityDIN EN ISO 1183-1g / cm3>0,93
Water absorptionDIN EN ISO 62%0,01
Flammability (Thickness 3 mm / 6 mm)UL 94HB
Molecular weight-106 g/mol 9
Test MethodUnitGuideline Value
Elongation at breakDIN EN ISO 527%>50
Tensile modulus of elasticityDIN EN ISO 527MPa>650
Notched impact strengthDIN EN ISO 11542-2kJ / m2>100
Shore hardnessDIN EN ISO 868scale D>63
Wear resistanceSand-slurry80
Sand Slurry1018 Steel=10 80
Test MethodUnitGuideline Value
Melting temperatureISO 11357-3°C130 ... 135
Thermal conductivityDIN 52612-1W / (m * K)0,40
Thermal capacityDIN 52612kJ / (kg * K)1,90
Coefficient of linear thermal expansionDIN 5375210-6 / K150 ... 230
Service temperature, long termAverage°C-250 … 80
Service temperature, short term (max.)Average°C130
Vicat softening temperatureDIN EN ISO 306, Vicat B°C80
Test MethodUnitGuideline Value
Dielectric constantIEC 602502,3
Dielectric dissipation factor (106 Hz)IEC 602500,0001
Volume resistivityDIN EN 62631-3-1Ω * cm>1014
Surface resistivityDIN EN 62631-3-2>1014
Comparative tracking indexIEC 60112600
Dielectric strengthIEC 60243kV / mm>40


You have the option of attaching files to your message. The files have to be JPEG, PNG, BMP, PDF-documents. Please be sure that you only add files up to 8 MB

Information on data protection can be found here.


Refine Results



Newsletter Registration

Select Website

Plastics for technical applications