LubX® AST white
PE — PE-UHMW - PE 1000
blanc, similaire RAL 9010
plaque
Characteristics
- Antistatique
- Good sliding properties
- Good dry-running properties
- Good wear resistance
Industries
Industrie agroalimentaire- Produits de boulangerie et de confiserie
- Industrie des boissons
Variants
Technical Specifications LubX® AST white
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Densité | DIN EN ISO 1183-1 | g / cm3 | 0,95 |
| Water absorption | DIN EN ISO 62 | % | 0,01 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB | |
| Non-toxicity | + | ||
| Moulding Compound PE | DIN ISO 1872-1 | UHMW-PE-QCD 35-3-4 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 15 |
| Elongation at yield stress | DIN EN ISO 527 | % | 23 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 510 |
| Impact strength | DIN EN ISO 179 | kJ / m2 | 50 |
| Shore hardness | DIN EN ISO 868 | scale D | 60 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | 133 – 135 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 150 - 230 (*) |
| Service temperature, long term | Average | °C | -150 … 80 (*) |
| Service temperature, short term (max.) | Average | °C | 130 (*) |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Volume resistivity | DIN EN 62631-3-1 | Ω * cm | ≤109 |
| Surface resistivity | DIN EN 62631-3-2 | Ω | ≤109 |
