Sustatron® PPS MOD blue
PPS
The High Performance Sliding Material
The addition of special additives gives the material extremely good tribological properties (low wear and low coefficient of friction) in many sliding applications. Sustatron PPS MOD is therefore particularly suitable as a high-quality solution for bearings, bushings, valves, and compressor applications, especially at high temperatures. The fiber reinforcement also guarantees good performance even above the glass transition temperature.
bleu
jonc
Characteristics
- High hardness
- High rigidity
- High heat deflection temperature
- Low moisture absorption
- Chemical resistant
- Low wear
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 809727 | Sustatron® PPS MOD blue extruded | jonc | jonc | bleu | Ø 60 x 3000 mm | 3 000 mm | 60 mm | |||
| No stock item (MOQ) | 809728 | Sustatron® PPS MOD blue extruded | jonc | jonc | bleu | Ø 60 x 1000 mm | 1 000 mm | 60 mm | |||
| No stock item (MOQ) | 809730 | Sustatron® PPS MOD blue extruded | jonc | jonc | bleu | Ø 40 x 1000 mm | 1 000 mm | 40 mm | |||
| No stock item (MOQ) | 809732 | Sustatron® PPS MOD blue extruded | jonc | jonc | bleu | Ø 16 x 3000 mm | 3 000 mm | 16 mm | |||
| No stock item (MOQ) | 810101 | Sustatron® PPS MOD blue extruded | jonc | jonc | bleu | Ø 100 x 3000 mm | 3 000 mm | 100 mm | |||
| No stock item (MOQ) | 921205 | Sustatron® PPS MOD blue extruded | jonc | jonc | bleu | Ø 90 x 3000 mm | 3 000 mm | 90 mm |
Technical Specifications Sustatron® PPS MOD blue
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Densité | DIN EN ISO 1183-1 | g / cm3 | 1,38 |
| Water absorption | DIN EN ISO 62 | % | 0,0 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | V0 / V0 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 50 |
| Elongation at break | DIN EN ISO 527 | % | 4 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 3000 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 5,0 |
| Shore hardness | DIN EN ISO 868 | scale D | 77 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | 285 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 50 |
| Service temperature, long term | Average | °C | -20 … 220 |
| Service temperature, short term (max.) | Average | °C | 260 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Volume resistivity | DIN EN 62631-3-1 | Ω * cm | 1016 |
| Surface resistivity | DIN EN 62631-3-2 | Ω | 1013 |
