Polystone® P (RandomCopolymer) natural
PP-R
natural
welding rod
Characteristics
- High rigidity
- Very good weldability
- Corrosion resistance
- Very high heat resistance
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 358406 | Polystone® P (RandomCopolymer) natural extruded | welding rod | welding rod | natural | Ø 3 (+/-0,2) mm | 3 mm | ||||
| Stock item (no MOQ) | 361535 | Polystone® P (RandomCopolymer) natural extruded | welding rod | welding rod | natural | Ø 4 (-0,3/+0,2) mm | 4 mm | ||||
| No stock item (MOQ) | 415923 | Polystone® P (RandomCopolymer) natural extruded | welding rod | welding rod | natural | Ø 4 (-0,3/+0,2) mm | 4 mm | ||||
| No stock item (MOQ) | 419328 | Polystone® P (RandomCopolymer) natural extruded | welding rod | welding rod | natural | Ø 3 (+/-0,2) mm | 3 mm |
Technical Specifications Polystone® P (RandomCopolymer) natural
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | >0,91 |
| Water absorption | DIN EN ISO 62 | % | <0,1 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | >23 |
| Elongation at break | DIN EN ISO 527 | % | >50 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | >1000 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | >10 |
| Shore hardness | DIN EN ISO 868 | scale D | >64 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | 146 ... 152 |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,20 |
| Thermal capacity | DIN 52612 | kJ / (kg * K) | 1,70 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 120 ... 190 |
| Service temperature, long term | Average | °C | -10 … 100 |
| Service temperature, short term (max.) | Average | °C | 135 |
| Vicat softening temperature | DIN EN ISO 306, Vicat B | °C | 65 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | IEC 60250 | 2,5 | |
| Dielectric dissipation factor (106 Hz) | IEC 60250 | 0,00019 | |
| Volume resistivity | DIN EN 62631-3-1 | Ohm * cm | >1014 |
| Surface resistivity | DIN EN 62631-3-2 | Ohm | >1014 |
| Dielectric strength | IEC 60243 | kV / mm | >40 |
