SG

Please select a language / region

 

Matrox® SI 12 black

PE — PE-UHMW - PE 1000

Matrox® is outstanding for its extremely low coefficient of friction and high wear resistance and so optimally meets requirements for the lining of silos and bunkers.

black, similar RAL 9004
sheet
QR-Code

Characteristics

  • Extremely low coefficient of friction
  • Very good abrasion and wear resistance
  • Good impact strength

Application Examples

Bunker and silo linings

In bunkers and silos large drop heights and the hard impact of the bulk goods cause extreme wear on the lining. The hopper-shaped outlet leads to core and mass flow problems. Safety requirements or the need to handle food, for instance, place further demands on the selection of the appropriate lining materials.

Linings for mine vehicles

Wherever bulk goods are transported, stored or further processed, wear and caking cause standstills in the work process. The flow of materials stops and wear destroys the body of the dumper. Our material Matrox® combines the best surface friction with maximum abrasion resistance to improve the flow rating of your bulk goods and prevent abrasion even in the harshest conditions.

Highly wear-resistant linings

We have developed a lining system for supply silos of biogas facilities specifically for the biogas sector: Our Matrox®-linings permanently prevent corrosion and wear. The material offers high chemicals resilience, outstanding wear resilience and excellent sliding properties that promote material flow.

Wagon linings

The universal use of freight wagons for a wide variety of bulk goods demands a balance between protecting against wear and minimizing friction. In principle we recommend our Matrox® SI 12 for hopper, saddle or standard type wagons. Particular bulk goods may create a requirement for special linings in certain circumstances. We would be happy to advise.

Matrox® wagon linings

The use of freight wagons for a wide variety of bulk materials demands a balance between protecting against wear and minimising friction. For hopper, saddle or standard type wagons, we recommend our Matrox® material. Matrox® combines the best surface friction with the highest abrasion resistance and thus promotes the optimal material flow of your bulk goods.

Variants

SKUNameTypeTypeColorMeasurementsLengthWidthThicknessHeight
No stock item (MOQ)
366185Matrox® SI 12 black pressed sheet sheet black, similar RAL 90046.000 x 2.500 x 13 mm 6,000 mm 2,500 mm 13 mm
No stock item (MOQ)
438047Matrox® SI 12 black pressed sheet sheet black, similar RAL 90043.000 x 2.000 x 50 mm 3,000 mm 2,000 mm 50 mm
No stock item (MOQ)
438451Matrox® SI 12 black pressed sheet sheet black, similar RAL 90046.000 x 2.000 x 50 mm 6,000 mm 2,000 mm 50 mm
No stock item (MOQ)
475548Matrox® SI 12 black pressed sheet sheet black, similar RAL 90042.000 x 1.000 x 20 mm 2,000 mm 1,000 mm 20 mm
No stock item (MOQ)
475600Matrox® SI 12 black pressed sheet sheet black, similar RAL 90046.000 x 2.000 x 20 mm 6,000 mm 2,000 mm 20 mm

Technical Specifications Matrox® SI 12 black

Test MethodUnitGuideline Value
DensityDIN EN ISO 1183-1g / cm3>0,94
Water absorptionDIN EN ISO 62%<0,01
Flammability (Thickness 3 mm / 6 mm)UL 94HB
Molecular weight-106 g/mol4
Test MethodUnitGuideline Value
Yield stressDIN EN ISO 527MPa>19
Elongation at breakDIN EN ISO 527%>50
Tensile modulus of elasticityDIN EN ISO 527MPa>700
Notched impact strengthDIN EN ISO 11542-2kJ / m2>70
Shore hardnessDIN EN ISO 868scale D>63
Wear resistanceSand-slurry125
Sand Slurry1018 Steel=10 120
Test MethodUnitGuideline Value
Melting temperatureISO 11357-3°C130 ... 135
Thermal conductivityDIN 52612-1W / (m * K)0,40
Thermal capacityDIN 52612kJ / (kg * K)1,90
Coefficient of linear thermal expansionDIN 5375210-6 / K150 ... 230
Service temperature, long termAverage°C-100 … 80
Service temperature, short term (max.)Average°C130
Vicat softening temperatureDIN EN ISO 306, Vicat B°C79
Test MethodUnitGuideline Value
Dielectric constantIEC 602502,3
Dielectric dissipation factor (106 Hz)IEC 602500,0004
Comparative tracking indexIEC 60112600
Dielectric strengthIEC 60243kV / mm>40

Contact

You have the option of attaching files to your message. The files have to be JPEG, PNG, BMP, PDF-documents. Please be sure that you only add files up to 8 MB

Information on data protection can be found here.


 
Search

Refine Results

Contact

Share

Print to PDF

Newsletter Registration

Select Website

Roechling_Industrial_Banner.jpg
Plastics for technical Applications

Industrial