Lamigamid® 300

PA — PA 6 G

Characteristics

Impact resistant
Vibration damping
Low moisture absorption

Industries

Application Examples

Support plates and support plate pads

Cranes and construction machines have to be secure and stable. Lamigamid^® support plates are light, stable and have a low impact on the ground. Even at high impact loads, the plastic plates remain dimensionally stable. Support plates made of Lamigamid^® are used at support pressures of 250kN to 1,500kN. Heavy-duty support plates are made of Lamigamid^® 300, Lamigamid^® 310 or Lamigamid^® 400. We supply support plates complete with assembly material according to the customers’ requirements – both for permanently mounted and removable versions.

Sliding elements for telescopic booms

Sliding and pushing movements occur in various places in cranes and hoisting equipment. The self-lubricating properties and high wear resistance of the sliding elements such as glide strips, glide sheets and sliding guides made of Lamigamid^® support this process and prevent stick-slip effects. + Slider for curved telescopic segments + Guide of the hydraulic cylinder in the telescopic boom + Slider in the construction machine + Slider with grease grooves Properties Heavy dutyLow moisture absorptionGood emergency operating properties

Support plates

Telescopic cranes and truck-mounted cranes have to be secure and stable. Plastic support plates are used for this purpose. Support plates made of Lamigamid^® are light and stable and have a low impact on the ground surface. Even at high impact loads, the plastic plates remain dimensionally stable. Support plates made of Lamigamid^® are used at support pressures of 250kn – 1500kn. Heavy-duty support plates are made of Lamigamid^® 300, Lamigamid^® 310 or Lamigamid^® 400. We supply support plates complete with assembly material according to your requirements – both for permanently installed and removable versions. + Removable support plate made of Lamigamid^® 300 + Support plate made of Lamigamid^® 300 with variable positioning + A Liebherr LRS 545 Reachstacker with a support plate made of Lamigamid^® 300, © Liebherr Special features: Heavy dutyLighter than steel structuresShatter-proof, shock-resistant and impact-resistant

Agitator paddles made of Lamigamid® 300

Agitator paddles made of Lamigamid^® 300 have good wear and strength properties because of the tough material formulations. Despite its distinct material toughness, the material has a high flow resistance, i.e. it remains dimensionally stable even at higher loads. Furthermore, Lamigamid^® 300 is resistant to the usual liquids used in biogas plants. We can produce agitator paddles in large dimensions of more than 3000mm.

Castors

Castors -Castors made of our materials Sustamid^® 6G and Lamigamid^® machined within tight tolerances are subject to less wear than steel because of their excellent abrasion resistance and high mechanical strength and toughness, are low-maintenance and thus make for a very long servicelife. We would be happy to advise and support you in selecting materials, designing and performing stress computations.

Technical Specifications Lamigamid® 300

General properties

	Test Method	Unit	Guideline Value
Density	DIN EN ISO 1183-1	g / cm³	1,07-1,14
Water absorption	DIN EN ISO 62	%	5,4-5,9

Mechanical properties

	Test Method	Unit	Guideline Value
Yield stress	DIN EN ISO 527	MPa	50-85
Elongation at break	DIN EN ISO 527	%	22-375
Tensile modulus of elasticity	DIN EN ISO 527	MPa	2000-4000
Notched impact strength	DIN EN ISO 179	kJ / m²	4,5-21,5