Please select a language / region


Trovidur® EC N orange


T-2003 orange


  • High chemical resistance to acids, lyes and salt solutions
  • Good weldability and glueability
  • Very good electrical insulation properties
  • Easy processing
  • Vacuum formable
  • Self-Extinguishing after removal of the flame
  • Good impact strength

Application Examples

Каплеотделитель в системе вентиляции

Изготовленные из химически стойкого материала Trovidur® EC-N (PVC-U), воздухоочистители
агрессивных газов в очистителе воздуха присутствуют постоянно.

In stock (no MOQ)
100718Trovidur® EC N orange extruded sheet T-2003 orange2.000 x 1.000 x 3 mm 2 000 mm 1 000 mm 3 mm
In stock (no MOQ)
100719Trovidur® EC N orange extruded sheet T-2003 orange2.440 x 1.220 x 3 mm 2 440 mm 1 220 mm 3 mm

Technical Specifications Trovidur® EC N orange

Test MethodUnitGuideline Value
DensityDIN EN ISO 1183-1g / cm31,44
Water absorptionDIN EN ISO 62%0,2
Flammability (Thickness 1 ... 4 mm)DIN 4102B1
Flammability from 3 mmUL 94V0, 5VA
Flammability from 1 mmUL 94V0, 5VB
Flammability (Thickness 1 ... 10 mm)NF P 92-501M1
Flammability (Thickness 1,5 ... 12 mm)BS 476 Part 6Class 0
Flammability (Thickness 1,5 ... 12 mm)BS 476 Part 7Class 1
Flammability (Thickness 1,5 ... 6 mm)EN 13501-1B -s3d0
WRAS (Thickness 1 ... 6 mm), greyBS6920-1listed
Test MethodUnitGuideline Value
Yield stressDIN EN ISO 527MPa55
Elongation at breakDIN EN ISO 527%20
Tensile modulus of elasticityDIN EN ISO 527MPa3000
Notched impact strengthDIN EN ISO 179kJ / m24
Shore hardnessDIN EN ISO 868scale D82
Ball indentation hardnessDIN EN ISO 2039-1MPa110
Compressive strengthDIN EN ISO 604MPa75
Bending strengthDIN EN ISO 178MPa80
Test MethodUnitGuideline Value
Thermal conductivityDIN EN ISO 8302W / (m * K)0,16
Vicat softening temperatureDIN EN ISO 306, Vicat B°C75
Service Temperature°C- 15 ... + 60
Heat deflection temperatureDIN EN ISO 75°C68
Coefficient of linear thermal expansionDIN EN ISO 11359-2mm/m K 0,075
Glow wire ignition tempeartureDIN EN 60695-2-13°C925
Glow wire flammability indexDIN EN 60695-2-12°C960
Test MethodUnitGuideline Value
Dielectric constantIEC 60250 3,2
Dielectric dissipation factor (106 Hz)IEC 60250 0,02
Volume resistivityDIN EN 62631-3-1Ohm * cm>1015
Surface resistivityDIN EN 62631-3-2Ohm>1013
Dielectric strengthIEC 60243kV / mm12
Comparative tracking indexIEC 60112CTI600


You have the option of attaching files to your message. The files have to be JPEG, PNG, BMP, PDF-documents. Please be sure that you only add files up to 8 MB

Information on data protection can be found here.


Refine Results



Print to PDF

Подписаться на рассылку

Select Website

Пластмассы для технических применений