Trovidur® ET transparent
PVC-U
T-05 crystal clear
sheetwelding rod
Characteristics
- Alta transparencia
- Muy bueno imprimible
- RoHS
- Compatible con ELV
- Cumple con WEEE
- Compatible con RLAP
- Retardante de llama
- Autoextinguible tras retirar la llama.
- Baja absorción de humedad
- Resistencia química
- Aislamiento eléctrico
- buena soldabilidad
- Buena termoformabilidad
- Good glueability
- Buena resistencia al impacto
Variants
Technical Specifications Trovidur® ET transparent
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,40 |
| Water absorption | DIN EN ISO 62 | % | 0,20 |
| Flammability (Thickness from 2 mm) | UL 94 | V0 | |
| Flammability (Thickness 1 mm … 5 mm) | NF P 92-501 | M1 | |
| Flammability (Thickness 1 mm … 5 mm) | DIN 4102 | B1 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 70 |
| Elongation at break | DIN EN ISO 527 | % | 10 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 3200 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 2 |
| Shore hardness | DIN EN ISO 868 | scale D | 83 |
| Ball Hardness | ISO 2039 | MPa | 140 |
| Bending strength | DIN EN ISO 178 | MPa | 80 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Vicat softening temperature | DIN EN ISO 306, Vicat B | °C | 67 |
| Service Temperature | °C | -10 ... +50 | |
| Heat deflection temperature | DIN EN ISO 75 | °C | 59 |
| Coefficient of linear thermal expansion | DIN EN ISO 11359-2 | mm/m K | ∼ 0,075 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | IEC 60250 | 3,2 | |
| Dielectric dissipation factor (106 Hz) | IEC 60250 | 0,02 | |
| Volume resistivity | DIN EN 62631-3-1 | Ω * cm | >1015 |
| Surface resistivity | DIN EN 62631-3-2 | Ω | >1013 |
| Dielectric strength | IEC 60243 | kV / mm | 12 |
| Comparative tracking index | IEC 60112 | CTI | 450 |
