Sustarin® H natural
POM-H
The Polyacetal Homopolymer (POM H)
Sustarin® H, often known on the market as ‘Delrin’, the brand name of the raw material manufacturer, has a slightly higher density, stiffness and strength compared to Sustarin® C. The chemical resistance, in particular the hydrolysis resistance of Sustarin® H is significantly worse than that of the copolymer. Sustarin® C (FG) should therefore be used in preference, especially in the food industry, where hot water is frequently used for cleaning. The homopolymer has an advantage in applications with high mechanical loads.
natural
sheetrod
Characteristics
- Baja absorción de humedad
- Buena resistencia al desgaste
- Alta resistencia mecánica
- Alta rigidez
- Buena dureza
- alta resistencia a la fluencia
- Buena maquinabilidad
- Buena estabilidad dimensional
Application Examples
Variants
Technical Specifications Sustarin® H natural
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,42 |
| Water absorption | DIN EN ISO 62 | % | 0,2 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB / HB |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 75 |
| Elongation at break | DIN EN ISO 527 | % | 30 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 3200 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 10 |
| Shore hardness | DIN EN ISO 868 | scale D | 83 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | 175 |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,31 |
| Thermal capacity | DIN 52612 | kJ / (kg * K) | 1,50 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 100 |
| Service temperature, long term | Average | °C | -50 … 90 |
| Service temperature, short term (max.) | Average | °C | 150 |
| Heat deflection temperature | DIN EN ISO 75, Verf. A, HDT | °C | 110 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | IEC 60250 | 3,8 | |
| Dielectric dissipation factor (50 Hz) | IEC 60250 | 0,002 | |
| Volume resistivity | DIN EN 62631-3-1 | Ω * cm | 1015 |
| Surface resistivity | DIN EN 62631-3-2 | Ω | 1015 |
| Comparative tracking index | IEC 60112 | 600 | |
| Dielectric strength | IEC 60243 | kV / mm | 25 |
