UK

Please select a language / region

 

Lamigamid® 307

PA — PA 6 G

QR-Code

Characteristics

  • Good sliding properties
  • Good thermal stability
  • Good wear resistance

Application Examples

Support plates and support plate pads

Cranes and construction machines have to be secure and stable. Lamigamid® support plates are light, stable and have a low impact on the ground. Even at high impact loads, the plastic plates remain dimensionally stable. Support plates made of Lamigamid® are used at support pressures of 250kN to 1,500kN. Heavy-duty support plates are made of Lamigamid® 300, Lamigamid® 310 or Lamigamid® 400. We supply support plates complete with assembly material according to the customers’ requirements – both for permanently mounted and removable versions.

Pile helmets

Pile helmets made of our material Lamigamid® 450N offer perfectly matched toughness and strength. Lamigamid® 450N absorbs shocks and vibrations. Excellent damping behaviour noticeably reduces noise pollution for machine operators and for the environment. Lamigamid® 450N has a service life that is approximately two to five times longer than conventional liner materials. That results in a long service life of the buffers.

Sliding elements for telescopic booms

Sliding and pushing movements occur in various places in cranes and hoisting equipment. The self-lubricating properties and high wear resistance of the sliding elements such as glide strips, glide sheets and sliding guides made of Lamigamid® support this process and prevent stick-slip effects. + Slider for curved telescopic segments + Guide of the hydraulic cylinder in the telescopic boom + Slider in the construction machine + Slider with grease grooves Properties Heavy dutyLow moisture absorptionGood emergency operating properties

Support plates

Telescopic cranes and truck-mounted cranes have to be secure and stable. Plastic support plates are used for this purpose. Support plates made of Lamigamid® are light and stable and have a low impact on the ground surface. Even at high impact loads, the plastic plates remain dimensionally stable. Support plates made of Lamigamid® are used at support pressures of 250kn – 1500kn. Heavy-duty support plates are made of Lamigamid® 300, Lamigamid® 310 or Lamigamid® 400. We supply support plates complete with assembly material according to your requirements – both for permanently installed and removable versions. + Removable support plate made of Lamigamid® 300 + Support plate made of Lamigamid® 300 with variable positioning + A Liebherr LRS 545 Reachstacker with a support plate made of Lamigamid® 300, © Liebherr Special features: Heavy dutyLighter than steel structuresShatter-proof, shock-resistant and impact-resistant

Castors

Castors -Castors made of our materials Sustamid® 6G and Lamigamid® machined within tight tolerances are subject to less wear than steel because of their excellent abrasion resistance and high mechanical strength and toughness, are low-maintenance and thus make for a very long servicelife. We would be happy to advise and support you in selecting materials, designing and performing stress computations.

Technical Specifications Lamigamid® 307

Test MethodUnitGuideline Value
DensityDIN EN ISO 1183-1g / cm31,14
Water absorptionDIN EN ISO 62%4,6-6,2
Test MethodUnitGuideline Value
Yield stressDIN EN ISO 527MPa55-70
Elongation at breakDIN EN ISO 527%50-450
Tensile modulus of elasticityDIN EN ISO 527MPa2300-3400
Notched impact strengthDIN EN ISO 179kJ / m25-6
Test MethodUnitGuideline Value
Melting temperatureISO 11357-3°C220 - 225

Contact

You have the option of attaching files to your message. The files have to be JPEG, PNG, BMP, PDF-documents. Please be sure that you only add files up to 8 MB

Information on data protection can be found here.


 
Search

Refine Results

Contact

Share

Print to PDF

Newsletter Registration

Select Website

Roechling_Industrial_Banner.jpg
Plastics for technical Applications

Industrial