Matrox® SI 12 black
PE — PE-UHMW - PE 1000
Matrox® is outstanding for its extremely low coefficient of friction and high wear resistance and so optimally meets requirements for the lining of silos and bunkers.
black, similar RAL 9004
sheet
Characteristics
- Extremely low coefficient of friction
- Very good abrasion and wear resistance
- Good impact strength
Industries
Application Examples
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 366185 | Matrox® SI 12 black pressed | sheet | sheet | black, similar RAL 9004 | 6.000 x 2.500 x 13 mm | 6 000 mm | 2 500 mm | 13 mm | ||
| No stock item (MOQ) | 438047 | Matrox® SI 12 black pressed | sheet | sheet | black, similar RAL 9004 | 3.000 x 2.000 x 50 mm | 3 000 mm | 2 000 mm | 50 mm | ||
| No stock item (MOQ) | 438451 | Matrox® SI 12 black pressed | sheet | sheet | black, similar RAL 9004 | 6.000 x 2.000 x 50 mm | 6 000 mm | 2 000 mm | 50 mm | ||
| No stock item (MOQ) | 475548 | Matrox® SI 12 black pressed | sheet | sheet | black, similar RAL 9004 | 2.000 x 1.000 x 20 mm | 2 000 mm | 1 000 mm | 20 mm | ||
| No stock item (MOQ) | 475600 | Matrox® SI 12 black pressed | sheet | sheet | black, similar RAL 9004 | 6.000 x 2.000 x 20 mm | 6 000 mm | 2 000 mm | 20 mm |
Technical Specifications Matrox® SI 12 black
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | >0,94 |
| Water absorption | DIN EN ISO 62 | % | <0,01 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB | |
| Molecular weight | - | 106 g/mol | ≥4 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | >19 |
| Elongation at break | DIN EN ISO 527 | % | >50 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | >700 |
| Notched impact strength | DIN EN ISO 11542-2 | kJ / m2 | >70 |
| Shore hardness | DIN EN ISO 868 | scale D | >63 |
| Wear resistance | Sand-slurry | 125 | |
| Sand Slurry | 1018 Steel=10 | ∼ 120 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | 130 ... 135 |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,40 |
| Thermal capacity | DIN 52612 | kJ / (kg * K) | 1,90 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 150 ... 230 |
| Service temperature, long term | Average | °C | -100 … 80 |
| Service temperature, short term (max.) | Average | °C | 130 |
| Vicat softening temperature | DIN EN ISO 306, Vicat B | °C | 79 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | IEC 60250 | 2,3 | |
| Dielectric dissipation factor (106 Hz) | IEC 60250 | 0,0004 | |
| Comparative tracking index | IEC 60112 | 600 | |
| Dielectric strength | IEC 60243 | kV / mm | >40 |
