SCR is a special catalyst technology. It is used to reduce the emission of nitrogen oxides in diesel vehicles. In this way, the latest emission standards are also met. With current solutions, AdBlue can be easily refilled using various devices. For example at refilling stations for trucks.
As simple as filling up
The development of such refills is more complex than it seems. On the one hand, refilling should be as simple and straightforward as normal refuelling. Therefore, no liquids and vapours should be allowed to escape. Malfunctions such as premature shut-off must also be avoided.
Sophisticated refilling systems
Röchling Automotive offers such a filling system that meets even the highest requirements. In addition, we have many design solutions, materials and production processes as well as standardized components that contribute significantly to cost reduction.
The most important highlights
With us, engineering, toolmaking, equipment and processes for mass production come from one source. Thanks to our dense network of locations, we are almost always in the direct vicinity of our customers all over the world.
Integrated float valve in filler head
Space-saving pipe routing
Different concepts for each design and requirement
Best usage of available space
Robust design, suitable also for commercial vehicles
Standard solutions and components
Your customer benefit through our SCR Filling Systems
Integrated float valve for an "odourless" system
No liquid leakage through air-AdBlue mixture, vibrations or during vehicle transport
High load capacity for professional use
Special design protects the welding seam from stress
Space saving due to variable cross-sections
Integrated expansion unit in the vent line
in-house extrusion process, 3D blow moulding and thermoforming
FLV (Fill limit valve) for specific requirements
Technical solutions for every routing and every requirement
Standard components for cost reduction
Full Service from Röchling
Röchling develops filling systems considering tank design and interfaces
Complete service including CAD/CAE, prototypes, test laboratory, tooling and equipment, production infrastructure and concepts for small series and mass production.
Over 50 years of experience with plastics, welding technologies and fluid systems