Test Method | Unit | Guideline Value | |
---|---|---|---|
Density | ASTM D792 | g / cm3 | 1,14 |
Water Absorption 24 hours | ASTM D570 | % | 1 |
Dissipation Factor | ASTM D150 | 1MHz | 0,02 |
Water Absorption Saturation | ASTM D570 | % | 8,5 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Hardness | ASTM D785 | Shore D | 80 |
Tensile Strength at yield 73°F | ASTM D638 | psi | 12.000 |
Tensile Modulus | ASTM D638 | psi | 400.000 |
Elongation at Break | ASTM D638 | % | 40 |
Flexural Strength | ASTM D790 | psi | 15.000 |
Flexural Modulus | ASTM D790 | psi | 420.000 |
Compressive Strength | ASTM D695 | psi | 12.500 |
Rockwell Hardness | ASTM D785 | 85 | |
Rockwell Hardness | ASTM D785 | R | 121 |
Shear Strength | ASTM D732 | psi | 10.000 |
Izod Impact, Notched | ASTM D256 | ft-lb/in | 0,6 |
Coefficient of Friction, Dynamic | 0,25 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Thermal Conductivity | in/hr/ft2 /°F | 1,7 | |
CTE, linear | ASTM D696 | 1/K | 4,5x105 |
Melting Point | ASTM D3418 | °F | 500 |
Continuous Use | °F | 220 | |
Flammability, UL94 | 1/8 inch | HB | |
Deflection Temperature at 264psi | ASTM D648 | °F | 195 |
Deflection Temperature at 66psi | ASTM D648 | °F | 390 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Dielectric constant | ASTM D150 | 1MHz | 3,8 |
Dielectric strength | ASTM D149 | V/mil | 350 |
Surface resistivity | ASTM D257 | Ω/cm | ≥1013 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
FDA | YES |