SustaPEEK CM natural
PEEK
The compression moulded Premium Material with the highest dimensional stability
Compared to extruded semi-finished products made from SustaPEEK, SustaPEEK CM is characterized by an even lower level of residual stress and increased modulus of elasticity due to the manufacturing process (“compression molding”). It is therefore particularly suitable for components that require extremely high dimensional stability.
natural
sheetrod
Characteristics
- Flame retardant
- Self-extinguishing
- Low smoke density
- Good dimensional stability
Variants
| SKU | Name | Type | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No stock item (MOQ) | 709219 | SustaPEEK CM natural pressed | sheet | sheet | natural | 20 x 395 x 395 mm | 395 mm | 395 mm | 20 mm | ||
| No stock item (MOQ) | 711714 | SustaPEEK CM natural pressed | sheet | sheet | natural | 10 x 1020 x 1020 mm | 1 020 mm | 1 020 mm | 10 mm | ||
| No stock item (MOQ) | 711718 | SustaPEEK CM natural pressed | sheet | sheet | natural | 15 x 1020 x 1020 mm | 1 020 mm | 1 020 mm | 15 mm | ||
| No stock item (MOQ) | 931702 | SustaPEEK CM natural pressed | rod | rod | natural | Ø 295 x 35,00 mm | 35 mm | 295 mm |
Technical Specifications SustaPEEK CM natural
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,31 |
| Water absorption | DIN EN ISO 62 | % | 0,2 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | V0 / V0 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 70 |
| Elongation at break | DIN EN ISO 527 | % | 2 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 4100 |
| Shore hardness | DIN EN ISO 868 | scale D | 88 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | 343 |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,25 |
| Thermal capacity | DIN 52612 | kJ / (kg * K) | 1,34 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 50 |
| Service temperature, long term | Average | °C | -60 … 250 |
| Service temperature, short term (max.) | Average | °C | 310 |
| Heat deflection temperature | DIN EN ISO 75, Verf. A, HDT | °C | 152 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Dielectric constant | IEC 60250 | 3,2 | |
| Dielectric dissipation factor (50 Hz) | IEC 60250 | 0,001 | |
| Volume resistivity | DIN EN 62631-3-1 | Ω * cm | >1012 |
| Surface resistivity | DIN EN 62631-3-2 | Ω | >1012 |
| Dielectric strength | IEC 60243 | kV / mm | 20 |
