SustaPEEK MG green

PEEK

green

rod

Characteristics

High purity
Very good sterilisation resistance
ISO 10993 tested on semi-finished product
very high strength and rigidity
high-temperature stable up to 250°C in continuous operation
Chemical resistance

Industries

Healthcare

Application Examples

Mango para instrumental quirúrgico

Reto: Esterilizable, tacto de alta calidad y superficie de alta calidad, mecanizado con tolerancias muy ajustadas Se eligió SustaPEEK^® MG por sus propiedades especiales: Buena estabilidad requerida para la fabricación (componentes complejos y tolerancias muy ajustadas) Disipación del calor Buenas propiedades térmicas Buena resistencia química

Variants

Show product in Webshop

	SKU	Name	Type	Color	Measurements	Length	Thickness
Not in stock (MOQ)	687178	SustaPEEK MG green extruded	rod	green	Ø 10 x 3000 mm	3.000 mm	10 mm
Not in stock (MOQ)	744015	SustaPEEK MG green extruded	rod	green	Ø 10 x 1000 mm	1.000 mm	10 mm
Not in stock (MOQ)	807088	SustaPEEK MG green extruded	rod	green	Ø 8 x 1000 mm	1.000 mm	8 mm
Not in stock (MOQ)	807900	SustaPEEK MG green extruded	rod	green	Ø 12 x 3000 mm	3.000 mm	12 mm
Not in stock (MOQ)	807908	SustaPEEK MG green extruded	rod	green	Ø 50 x 3000 mm	3.000 mm	50 mm
Not in stock (MOQ)	808026	SustaPEEK MG green extruded	rod	green	Ø 12 x 1000 mm	1.000 mm	12 mm
Not in stock (MOQ)	808480	SustaPEEK MG green extruded	rod	green	Ø 6 x 3000 mm	3.000 mm	6 mm
Not in stock (MOQ)	808600	SustaPEEK MG green extruded	rod	green	Ø 50 x 1000 mm	1.000 mm	50 mm
Not in stock (MOQ)	808687	SustaPEEK MG green extruded	rod	green	Ø 6 x 1000 mm	1.000 mm	6 mm

Technical Specifications SustaPEEK MG green

General properties

	Test Method	Unit	Guideline Value
Density	DIN EN ISO 1183-1	g / cm³	1,38
Water absorption	DIN EN ISO 62	%	0,2
Flammability (Thickness 3 mm / 6 mm)	UL 94		V0 / V0

Mechanical properties

	Test Method	Unit	Guideline Value
Yield stress	DIN EN ISO 527	MPa	110
Elongation at break	DIN EN ISO 527	%	15
Tensile modulus of elasticity	DIN EN ISO 527	MPa	4000
Shore hardness	DIN EN ISO 868	scale D	88

Thermal properties

	Test Method	Unit	Guideline Value
Melting temperature	ISO 11357-3	°C	343
Thermal conductivity	DIN 52612-1	W / (m * K)	0,25
Thermal capacity	DIN 52612	kJ / (kg * K)	1,34
Coefficient of linear thermal expansion	DIN 53752	10^-6 / K	50
Service temperature, long term	Average	°C	-60 … 250
Service temperature, short term (max.)	Average	°C	310
Heat deflection temperature	DIN EN ISO 75, Verf. A, HDT	°C	152

Electrical properties

	Test Method	Unit	Guideline Value
Dielectric constant	IEC 60250		3,2
Dielectric dissipation factor (50 Hz)	IEC 60250		0,001
Volume resistivity	DIN EN 62631-3-1	Ohm * cm	4,9 * 10¹⁶
Surface resistivity	DIN EN 62631-3-2	Ohm	10¹⁸
Dielectric strength	IEC 60243	kV / mm	20