Sustamid® 6G ESD 60 black
PA — PA 6 G
black
bloc
Characteristics
- Good compressive strength
- Good machinability
- Electrically conductive
Variants
| SKU | Name | Type | Color | Measurements | Length | Width | Thickness | Height | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Not in stock (MOQ) | 601188 | Sustamid® 6G ESD 60 black in-mould polymerised | bloc | black | 10 x 620 x 1000 mm | 1.000 mm | 620 mm | 10 mm | ||
| Not in stock (MOQ) | 601193 | Sustamid® 6G ESD 60 black in-mould polymerised | bloc | black | 15 x 620 x 1000 mm | 1.000 mm | 620 mm | 15 mm | ||
| Not in stock (MOQ) | 601197 | Sustamid® 6G ESD 60 black in-mould polymerised | bloc | black | 25 x 620 x 1000 mm | 1.000 mm | 620 mm | 25 mm |
Technical Specifications Sustamid® 6G ESD 60 black
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,19 |
| Water absorption | DIN EN ISO 62 | % | 2,5 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB / HB |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 75 |
| Elongation at break | DIN EN ISO 527 | % | 5 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 4000 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 3,0 |
| Shore hardness | DIN EN ISO 868 | scale D | 80 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | 216 |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,29 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 70 |
| Service temperature, long term | Average | °C | -40 … 110 |
| Service temperature, short term (max.) | Average | °C | 170 |
| Heat deflection temperature | DIN EN ISO 75, Verf. A, HDT | °C | 100 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Surface resistivity | DIN EN 62631-3-2 | Ohm | <106 |
